Improving MALDI Mass Spectrometry Imaging Performance: Low-Temperature Thermal Evaporation for Controlled Matrix Deposition and Improved Image Quality

The deposition of matrix compounds significantly influences the effectiveness of matrix-assisted laser desorption/ionization (MALDI) Mass Spectrometry Imaging (MSI) experiments, impacting sensitivity, spatial resolution, and reproducibility. Dry deposition methods offer advantages by producing homogeneous matrix layers and minimizing analyte delocalization without the use of solvents. However, refining these techniques to precisely control matrix thickness, minimize heating temperatures, and ensure high-purity matrix layers is crucial for optimizing MALDI-MSI performance. Here, we present a novel approach utilizing low-temperature thermal evaporation (LTE) for organic matrix deposition under reduced vacuum pressure. Our method allows for reproducible control of matrix layer thickness, as demonstrated by linear calibration for two organic matrices, 2,5-dihydroxybenzoic acid (DHB) and 1,5-diaminonaphthalene (DAN). The environmental scanning electron microscopy images reveal a uniform distribution of small-sized matrix crystals, consistently on the sub-micrometer scale, across tissue slides following LTE deposition. Remarkably, LTE serves as an additional purification step for organic matrices, producing very pure layers irrespective of initial matrix purity. Furthermore, stability assessment of MALDI-MSI data from mouse brain sections coated with LTE-deposited DHB or DAN matrix indicates minimal impact on ionization efficiency, signal intensity, and image quality even after storage at -80 °C for 2 weeks, underscoring the robustness of LTE-deposited matrices for MSI applications. Comparative analysis with the spray-coating method highlights several advantages of LTE deposition, including enhanced ionization, reduced analyte diffusion, and improved MSI image quality.