Extension-type flexible pneumatic actuator with a large extension force using a cross-link mechanism based on pantographs

In this study, we propose an extension-type flexible pneumatic actuator (EFPA) with a high extension force and no buckling. In a previous study, soft actuators that extended in the axial direction by applying a supply pressure were unable to generate the extension’s pushing force because the actuators buckled owing to their high flexibility. To generate a pushing force, the circumferential stiffness of an extension-type flexible soft actuator must be reinforced. Therefore, a cross-linked EFPA (CL-EFPA) was developed, inspired by a pantograph that restrains the EFPA three-dimensionally using the proposed link mechanism. The proposed CL-EFPA consists of three EFPAs and a cross-linking mechanism for integrating each EFPA circumference. The pushing force of the CL-EFPA is approximately 3.0 times compared with that generated by the previous EFPA with plates to restrain its plane. To perform various bending motions, attitude control was performed using an analytical model and a system that included valves, sensors, and controllers. • A soft actuator that can be generated the extension force of 380 N while maintaining flexibility. • Young's modulus, which corresponds to the bending stiffness of the actuator increases by the mechanism. • The attitude control using the analytical model is realized (the error of bending angle and centerline length are 7.0 % and 2.1 %)