Reducing the Waste of Plating Solution for Magnetostrictive Torque Sensors

<div class="section abstract"><div class="htmlview paragraph">The power assist system of an electric bicycle uses a magnetostrictive torque sensor to detect the pedal force based on the magnetic properties of the crankshaft, which change according to stress. Fe–Ni alloy plating is used to coat the surface of the crankshaft with a magnetic film to enhance the magnetostrictive effect. However, the sensor performance decreases as the plating solution degrades, which necessitates replacement of the plating solution. In this study, experiments were performed to investigate how to prevent or mitigate degradation of the plating solution to reduce waste. The amounts of carbon and sulfur in the magnetic film were found to increase with degradation of the plating solution. The carbon derived from organic reducing agents and their decomposition products, and the sulfur derived from stress relievers and their decomposition products. A method was developed for reducing the amounts of carbon and sulfur in the magnetic film, which would help maintain the sensor performance and thus reduce the waste of plating solution.</div></div>