Directly Printed 3D Soft Microwave Plasmonic Enhanced‐Q Resonators by Decoupling from Lossy Media (Adv. Mater. 15/2025)
Directly Printed Soft 3D Plasmonic Resonators Conventional 2D plasmonic resonators face limitations in their application to soft electronic platforms due to signal attenuation induced by lossy media. In article number 2418182, Seungjun Chung and co-workers developed directly printed 3D plasmonic resonators with highly conductive elastomeric composites. Diverse soft 3D resonators demonstrated structural and signal integrities under repetitive strain cycles, highlighting higher Q-factor resonances even on lossy media.
Authors
- Hoon Yeub Jeong (ORCID: https://orcid.org/0000-0003-1099-9906)
- Jun‐Chan Choi (ORCID: https://orcid.org/0000-0001-6786-1081)
- Heesuk Kim (ORCID: https://orcid.org/0000-0002-0898-7781)
- Jae‐Hoon Han (ORCID: https://orcid.org/0000-0003-3575-9140)
- Seungjun Chung (ORCID: https://orcid.org/0009-0003-4706-5880)
- Jong Hyun Jeong (ORCID: https://orcid.org/0000-0002-6749-9948)
Institutions
- Korea University (KR)
- Korea Institute of Science and Technology (KR)
Publication Details
- Journal
- Advanced Materials
- Published
- 2025-04-01
- DOI
- https://doi.org/10.1002/adma.202570118
- Primary Topic
- Photonic and Optical Devices
- Type
- article
- Field-Weighted Citation Impact
- 0.00