Optimizing VO2 integration in cements for the development of thermochromic building materials

Thermochromic vanadium dioxide (VO 2 ) was implemented in opaque cementitious matrices. The impact of three different VO 2 types on cement hydration progress was investigated. The leaching behavior of these systems when exposed to water was analyzed and the material’s optical properties were assessed. The presence of VO 2 has a retardation effect on the hydration of ordinary Portland cement, less pronounced in the case of tungsten-doped VO 2 . Additionally, the increased solubility of vanadium oxide in alkaline environments leads to partial loses of vanadium from the matrix during hydration and when exposed to leaching cycles. Tests carried out on fast setting cements in combination with tungsten-doped VO 2 showed promising results in terms of VO 2 stability within the matrix: (i) the retardation of the hydration process could be shortened, and (ii) < 1 % of the vanadium was lost through leaching. The improved integration of VO 2 into the matrix enhanced the material’s thermochromic behavior, represented by a ∼4 % reflectance difference over a temperature interval between 31 and 24 °C. The resulting systems set the basis for the design of intelligent building materials that could be applied to roofs or facades to optimize indoor temperature conditions and thus reduce energy demands in buildings. • Thermochromic VO 2 was stabilized in fast setting cement matrices. • Tungsten-doped VO 2 does not lead to significant retardation of cement hydration. • Vanadium leaching was reduced in VO 2 -cement systems keeping thermochromic behavior.