Treatment of Malachite Green Dye-Contaminated Wastewater via Photolysis Treatment Process

A photodegradation experiment was performed in a batch photoreactor, and concentration reduction and degradation efficiency were calculated from absorbance values obtained using an ultraviolet-visible (UV-Vis) spectrophotometer.The effects of different operational parameters were studied.The effects of various UV wavelengths were investigated using different types of UV irradiation, UV-A, UV-B, and UV-C.UV-C, which has the shortest wavelength and therefore the highest energy, was the most effective UV irradiation to degrade malachite green (MG) molecules, resulting in 88% degradation after 3 h of irradiation.Increasing the dye's initial concentration resulted in reduced degradation rates.The highest degradation was at 20 ppm (92.2%), while the lowest was at 100 ppm (61.9%).The photodegradation rate was better at neutral pH (95.6%) compared to acidic pH (84.2%).Longer irradiation time resulted in increasing degradation efficiency of MG.Due to the incomplete mineralisation of the dye after photolysis, COD and TOC content decreased only by 3.7% and 8%, respectively.Meanwhile, BOD analysis increased after photolysis, proving that photolysis is an efficient pre-treatment method before biological treatment.Reaction kinetic studies indicated that all experiments conformed to first-order kinetics, and the degradation rate constants were between 0.0054 min -1 and 0.0171 min -1 , with correlation coefficients ranging between 0.9286 to 0.9938.