Contact Load Calculation Models for Finite Line Contact Rollers in Bearing Dynamic Simulation Under Dry and Lubricated Conditions

The key to exploring the behavior of bearings through dynamic methods lies in establishing an accurate model for calculating the contact load between the roller and the raceway. Based on the half-space theory of Boussinesq, this study developed a full-order model for calculating the contact load of the finite line contact roller. The model adopted an iterative procedure to calculate the contact load of each roller slice according to deformations. According to the comparisons between the contact loads obtained by the proposed model and those obtained by FEA, the average error for a cylindrical roller was approximately 2%, while that for a tapered roller was approximately 17%. By neglecting the influences of inter-slice contact stresses on the deformation of local roller slice, a fast-calculating method for the full-order model was developed, thereby reducing the calculation time by approximately 77%. By integrating the fast method with the Dowson–Higginson’s formula, another model was developed to calculate the contact load under lubrication conditions. The proposed models were utilized to investigate the dynamic characteristics of a double-row tapered roller bearing, and the results were validated through experiments. The proposed method could be utilized to assess dynamic performances of bearings across different operating scenarios.