Replacing Sand in Concrete: Review on Potential for Utilization of Bottom Ash from Combustion of Wood in Circulating Fluidized Bed Boilers

Aggregates such as sand and gravel are the most mined resources on Earth and are the largest component in concrete. They are essential for construction but are becoming increasingly scarce. At the same time, large amounts of biomass ashes are produced in wood-fired power plants, offering potential as a partial substitute for decreasing sand resources. Due to the combustion technology of circulating fluidized bed boilers, their bottom ash offers high potential as a viable alternative to natural sand. This review examines previous research to assess the feasibility of replacing sand in concrete with bottom ash. Specific cementitious products are identified, where the substitution could realistically be performed in the concrete industry. Benefits and issues with partial substitution of bottom ash from wood combustion are discussed, and gaps in the research regarding sand replacements with bottom ash, notably the durability of the resulting concrete, are shown. Bottom ash has positive properties relevant for use in mortar and concrete, both regarding physical and chemical properties. Although limited research exists in the field, several researchers have demonstrated promising results when substituting sand for bottom ash in mortars. For lower substitution levels, little effect on the fresh and hardened properties is found.