Determining the Mechanical Properties of Shale Constituent Minerals Using Nanoindentation and a TESCAN Integrated Mineral Analyzer (TIMA)

Understanding the mechanical properties of the constituent minerals of shales is of significance for gaining insight into the macroscopic mechanical behavior of shales. In this paper, a method combining nanoindentation with a TESCAN Integrated Mineral Analyzer (TIMA) was used to determine the mechanical properties of shale constituent minerals. The hardness and elastic modulus of five independent mineral phases and a mixed phase were detected. The order of the hardness of these five independent mineral phases is dolomite (4.90 ± 2.33 GPa) > wollastonite (4.84 ± 0.54 GPa) > ankerite (4.17 ± 1.37 GPa) > quartz (3.98 ± 0.67 GPa) > calcite (2.03 ± 0.29 GPa), and the order of the elastic modulus is dolomite (104.89 ± 11.25 GPa) > ankerite (103.70 ± 19.62 GPa) > wollastonite (100.78 ± 6.66 GPa) > quartz (88.04 ± 14.58 GPa) > calcite (78.20 ± 3.85 GPa). The mechanical properties of the shale mineral grain junctions are weaker than those inside the grains. When shale is subjected to an external load, it is more prone to intergranular failure. The proposed method in this study can rapidly and accurately probe the in situ mechanical properties of shale minerals. The results of this study enrich the database of in situ mechanical properties of shale minerals and provide a new insight into the macroscopy failure mode of shale.