Improving tribological performance of 3D-printed PEEK and CFR-PEEK composites by combining optimized deposition strategies and post-processing conditions

Controlling the tribological performance of fused filament fabrication (FFF) components remains a challenge, which depends on the understanding of their wear mechanisms. In this study, the effects of deposition strategies (Top, Front, and Side, corresponding to sliding surfaces perpendicular to the building, transverse, and scanning directions, respectively) and annealing temperatures (200 °C, 250 °C, and 300 °C) on the anisotropic tribological performance of FFF-printed polyether ether ketone (PEEK) and short carbon fiber-reinforced PEEK (CFR-PEEK) were investigated. We used a 316 L stainless steel ball as the counterpart for reciprocating sliding wear tests under water-lubricated conditions, detailing how the shift in the wear mechanism is attributed to the combined effect of the interfacial weld strength of the deposited layers, the fiber-matrix bonding strength, and the matrix crystallinity . The results show that the specific combination of deposition strategy and annealing temperature can effectively improve the wear performance of FFF-PEEK composites. For CFR-PEEK, the wear performance of Top specimens was best at the annealing temperature of 200 °C, Front specimens at 300 °C, and Side specimens were unsatisfactory at all annealing temperatures. Furthermore, fiber orientation is the predominant factor in determining the anisotropic tribological performance of CFR-PEEK, but the effect of the deposited layer orientation on the anisotropy should not be neglected. The findings offer critical insights for optimizing the design and fabrication of FFF-PEEK components for tribological applications. • FFF-PEEK composites with different deposition strategies are prepared. • The effects of annealing and deposition strategy on wear mechanisms are discussed. • Deposition strategy has various tribological responses to annealing temperature. • The fiber and deposited layer orientations induce the anisotropic wear behavior.