Numerical study of particle segregation during spray drying of binary suspension droplets

Spray drying bidisperse suspensions typically produces segregated microstructures, with small particles concentrated on the surface and larger particles inside. These supraparticles hold potential as functional materials in fields such as catalysis, drug delivery, and ceramics. Yet, the underlying structure formation mechanisms remain poorly understood. A coupled discrete element method (DEM) and computational fluid dynamics (CFD) model was employed to simulate structure formation during spray drying at the single-droplet scale. The effects of particle size ratio and particle concentration were systematically analysed to evaluate their impact on particle segregation. Segregation intensity was strongly influenced by particle size ratio, with larger ratios enhancing segregation, whereas higher particle concentrations reduced this effect. Consistent with theories on stratification in drying films, the particle concentration gradient was identified as the primary cause for segregation. The resulting differences in radial forces result in higher migration velocities towards the droplet centre for larger particles, leading to their preferential localisation inside the aggregate. At higher particle concentrations, the rapid formation of a jammed layer of small particles restricts the mobility of the particles, reducing the intensity of this effect. This study advances the understanding of particle segregation during spray drying by providing the first systematic investigation of the factors influencing this phenomenon. The findings deepen the mechanistic understanding of segregation and provide a basis for the development of predictive models for the design of tailored microstructures in spray-dried particles. • Multiphase simulation model for single suspension droplet drying. • Particle segregation observed with small particles near the surface. • Segregation strength primarily influenced by particle size ratio. • Further influence of particle concentration on segregation. • Segregation mechanism similar to small-on-top stratification in drying films.

Authors

Institutions

Publication Details

Journal
Powder Technology
Published
2025-04-11
DOI
https://doi.org/10.1016/j.powtec.2025.121019
Citations
2
Primary Topic
Fluid Dynamics and Heat Transfer
Type
article
Field-Weighted Citation Impact
2.67
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Numerical study of particle segregation during spray drying of binary suspension droplets

Silas Wolf, Carsten Schilde, Avi Levy, Dimitri Ivanov et al.
2 citations
Powder Technology
Fluid Dynamics and Heat Transfer
2.67
article

Numerical study of particle segregation during spray drying of binary suspension droplets

Silas Wolf, Carsten Schilde, Avi Levy, Dimitri Ivanov, Ν. Kuhn
article en
2 citations

Abstract

Spray drying bidisperse suspensions typically produces segregated microstructures, with small particles concentrated on the surface and larger particles inside. These supraparticles hold potential as functional materials in fields such as catalysis, drug delivery, and ceramics. Yet, the underlying structure formation mechanisms remain poorly understood. A coupled discrete element method (DEM) and computational fluid dynamics (CFD) model was employed to simulate structure formation during spray drying at the single-droplet scale. The effects of particle size ratio and particle concentration were systematically analysed to evaluate their impact on particle segregation. Segregation intensity was strongly influenced by particle size ratio, with larger ratios enhancing segregation, whereas higher particle concentrations reduced this effect. Consistent with theories on stratification in drying films, the particle concentration gradient was identified as the primary cause for segregation. The resulting differences in radial forces result in higher migration velocities towards the droplet centre for larger particles, leading to their preferential localisation inside the aggregate. At higher particle concentrations, the rapid formation of a jammed layer of small particles restricts the mobility of the particles, reducing the intensity of this effect. This study advances the understanding of particle segregation during spray drying by providing the first systematic investigation of the factors influencing this phenomenon. The findings deepen the mechanistic understanding of segregation and provide a basis for the development of predictive models for the design of tailored microstructures in spray-dried particles. • Multiphase simulation model for single suspension droplet drying. • Particle segregation observed with small particles near the surface. • Segregation strength primarily influenced by particle size ratio. • Further influence of particle concentration on segregation. • Segregation mechanism similar to small-on-top stratification in drying films.

Powder TechnologyVol. 459
Ben-Gurion University of the Negev (IL), Technische Universität Braunschweig (DE)
Openalex Percentile: Top 13%
Fluid Dynamics and Heat Transfer
2.67
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.