Integrating lithium-ion and thermal batteries with heat pumps for enhanced photovoltaic self-consumption

A promising solution to fully decarbonize the energy consumption of buildings consists of hybridizing solar PV installation with lithium-ion (Li-ion) batteries and heat pumps. However, the high capital cost per unit of energy storage of Li-ion batteries often results in systems with relatively small storage capacities, leading to low self-consumption ratios. Thermal batteries with power generation capacity, such as Power-to-heat-to-power storage (PHPS), leverage the significantly lower cost of thermal energy storage to increase the overall storage capacity of the system. In addition, PHPS systems generate heat as a by-product during the energy conversion, which can be used directly in the building to supply its heating demand. The goal of this study is to assess the profitability of integrating PHPS systems with heat pumps and Li-ion batteries. A techno-economic analysis, based on a fully-electrified building, demonstrates that the hybridization of PHPS and Li-ion batteries yields the lowest levelized cost of consumed energy, regardless of the coefficient of performance (COP) of the heat pump. This hybrid configuration takes advantage of the lower cost of the energy subsystem of PHPS, which is mostly used for baseload power generation (long duration discharge), and the higher efficiency and lower cost of power capacity of Li-ion batteries, which are optimized for peak power generation (short-duration discharge). Under the assumptions of this study, hybrid solution reduces the levelized cost of consumed energy by 7 % compared to a system relying solely on Li-ion batteries, while simultaneously increasing PV self-consumption by up to 20 %. • Profitability of hybrid PHPS with Li-ion batteries and heat pumps for PV self-use in electrified buildings was assessed. • PHPS integration boosts PV self-consumption and reduces levelized cost of consumed energy. • PHPS stores PV peak power and supplies base load energy over extended periods. • Li-ion batteries deliver high peak power for short durations more effectively. • Heat pumps enhances hybridization of PHPS with Li-ion batteries rather than replacing PHPS.

Authors

Institutions

Publication Details

Journal
Applied Energy
Published
2025-04-09
DOI
https://doi.org/10.1016/j.apenergy.2025.125767
Citations
3
Primary Topic
Advanced Battery Technologies Research
Type
article
Field-Weighted Citation Impact
2.05
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Integrating lithium-ion and thermal batteries with heat pumps for enhanced photovoltaic self-consumption

Alicia López-Ceballos, Ignacio Antón, Alejandro Datas, Carlos del Cañizo
3 citations
Applied Energy
Advanced Battery Technologies Research
2.05
article

Integrating lithium-ion and thermal batteries with heat pumps for enhanced photovoltaic self-consumption

Alicia López-Ceballos, Ignacio Antón, Alejandro Datas, Carlos del Cañizo
article en
3 citations

Abstract

A promising solution to fully decarbonize the energy consumption of buildings consists of hybridizing solar PV installation with lithium-ion (Li-ion) batteries and heat pumps. However, the high capital cost per unit of energy storage of Li-ion batteries often results in systems with relatively small storage capacities, leading to low self-consumption ratios. Thermal batteries with power generation capacity, such as Power-to-heat-to-power storage (PHPS), leverage the significantly lower cost of thermal energy storage to increase the overall storage capacity of the system. In addition, PHPS systems generate heat as a by-product during the energy conversion, which can be used directly in the building to supply its heating demand. The goal of this study is to assess the profitability of integrating PHPS systems with heat pumps and Li-ion batteries. A techno-economic analysis, based on a fully-electrified building, demonstrates that the hybridization of PHPS and Li-ion batteries yields the lowest levelized cost of consumed energy, regardless of the coefficient of performance (COP) of the heat pump. This hybrid configuration takes advantage of the lower cost of the energy subsystem of PHPS, which is mostly used for baseload power generation (long duration discharge), and the higher efficiency and lower cost of power capacity of Li-ion batteries, which are optimized for peak power generation (short-duration discharge). Under the assumptions of this study, hybrid solution reduces the levelized cost of consumed energy by 7 % compared to a system relying solely on Li-ion batteries, while simultaneously increasing PV self-consumption by up to 20 %. • Profitability of hybrid PHPS with Li-ion batteries and heat pumps for PV self-use in electrified buildings was assessed. • PHPS integration boosts PV self-consumption and reduces levelized cost of consumed energy. • PHPS stores PV peak power and supplies base load energy over extended periods. • Li-ion batteries deliver high peak power for short durations more effectively. • Heat pumps enhances hybridization of PHPS with Li-ion batteries rather than replacing PHPS.

Applied EnergyVol. 390
Universidad Politécnica de Madrid (ES)
Affordable and clean energy
Openalex Percentile: Top 14%
Advanced Battery Technologies Research
2.05
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.