New proton exchange membranes based on ionic liquid doped chitosan

The development of new proton exchange membranes (PEM) for electrochemical devices have attracted researcher's attention in the pursuit for more sustainable and cost-effective technologies for clean energy production and conversion. In this work, new doped chitosan (CS) membranes were prepared by the casting method. Chitosan is an abundant, biodegradable and non-toxic material, and as a membrane, a sustainable and cheaper alternative to those perfluorinated and commonly used, such as Nafion. Three different ionic liquids were employed as dopants , ([EMIM][OTf], [EMIM][FSI] and [MIMH][HSO 4 ]), in various concentrations and up to 50 wt% load. The new membranes were characterized by ATR-FTIR, thermogravimetry , using TGA and DSC techniques to assess their thermal properties, and by SEM, to analyse their surface morphology . Proton conduction properties of the new membranes were assessed by Electrochemical Impedance Spectroscopy (EIS). The new doped membranes showed an increase in the proton conduction compared with pristine chitosan membranes. The incorporation of ionic liquids into chitosan membranes improved their proton conductivity and thermal properties, with [EMIM][OTf] and [MIMH][HSO 4 ] showing the most promising results. A 2-fold increment in the proton conduction was generally observed with the increase of the temperature from 30 to 60 °C. The best proton conductivity was found at 60 °C for the membrane doped with [EMIM][OTf], with a value of 47 mS.cm −1 . • New chitosan doped membranes were prepared through the incorporation of ILs as dopants. • New doped membranes prepared by casting showed better proton conductivity than pristine chitosan. • Proton conductivity depends on the incorporated ILs and on its concentration. • SEM and TGA analysis suggest that membranes are suitable for use in electrochemical devices. • The best proton conductivity, 47 mS.cm −1 , was observed for [EMIM][OTf] IL with a 20 wt% loading.