Removing Fluoride from Water by Nanostructured Magnesia-Impregnated Activated Carbon

A facile method was employed to impregnate activated carbon, a commonly used water treatment medium, with nanostructured magnesium oxide for fluoride removal. Batch adsorption tests were conducted to evaluate the adsorption performance of the nanostructured magnesia-impregnated activated carbon (nMgO@AC) for fluoride removal. The results demonstrated that this composite material exhibited a good adsorption capacity, with a maximum equilibrium uptake of approximately 121.1 mg/g for fluoride. Kinetic studies revealed that the adsorption process followed the pseudo-second-order adsorption kinetic model, reaching equilibrium in about 100 min. Within the initial pH range of 3 to 11, the adsorption efficiency of nMgO@AC for fluoride remained above 95%, indicating that the initial solution pH had a minimal effect on the material’s fluoride removal capability. The adsorption mechanism was elucidated by characterizing the material properties before and after adsorption using SEM, TEM, XRD and XPS. Initially, magnesium oxide reacted with water and rapidly transformed into magnesium hydroxide. Subsequently, a ligand exchange occurred between the hydroxide groups in magnesium hydroxide and fluoride ions in the aqueous solution, resulting in the effective removal of fluoride. The findings of this study suggest that nanostructured magnesia-impregnated activated carbon holds significant potential for the treatment of fluoride-containing wastewater, particularly for highly alkaline wastewater.