Zinc-based oxides as alternative cheap and stable catalysts for the production of adipates from cyclopentanone and dimethyl carbonate

Developing sustainable catalytic processes for specialty monomers is essential for advancing a renewable-based economy. Adipic acid esters, such as dimethyl adipate (DMA), are key intermediates in polyester and polyamide production and can be synthesized with complete atom economy (100 %) through the reaction of bio-based cyclopentanone (CPO) with dimethyl carbonate (DMC) or other CO 2 -derived carbonates. This study evaluates, for the first time, the catalytic performance of ZnO and Zn/Mg mixed oxides for this transformation. ZnO exhibited superior selectivity for DMA (53 %), compared to conventional MgO and CeO 2 catalysts by effectively suppressing heavy by-product formation, thereby inhibiting CPO self-aldol condensation. This suppression minimizes catalyst fouling, allowing ZnO to be easily and readily recovered and reused without significant loss of activity. In contrast, Zn/Mg/O mixed oxides enhanced reaction rates but led to lower selectivity, primarily producing branched methylated adipates, which could serve as alternative polymer precursors. Optimization of catalyst composition and reaction conditions was critical for maximizing diester yields in this one-pot transformation, selectivity producing DMA over ZnO (up to 48 % yield after 7 h of reaction) or DMA and methylated DMAs (with yields higher than 40 % after 3 h of reaction in the presence of Zn/Mg/O). However, dedicated studies on the β-keto-ester intermediate revealed that methanol availability over the catalytic surface at the temperature required for the “one-pot” process (i.e. 260 °C) is a limiting factor. This constraint can reduce DMA yield and productivity due to the unselective decomposition of the intermediate, highlighting an area for further process refinement. • Synthesis of α,ω-diesters from cyclic ketones and dimethyl carbonate. •Alternative, cheap and recyclable heterogenous catalysts based on Zn-based oxides. •Investigation of the reaction scheme and β-keto-ester intermediate conversion toward adipates.

Authors

Institutions

Publication Details

Journal
Sustainable Chemistry and Pharmacy
Published
2025-04-08
DOI
https://doi.org/10.1016/j.scp.2025.102018
Primary Topic
Carbon dioxide utilization in catalysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Zinc-based oxides as alternative cheap and stable catalysts for the production of adipates from cyclopentanone and dimethyl carbonate

Nikolaos Dimitratos, Jacopo De Maron, Gabriele Galletti, Tommaso Tabanelli et al.
Sustainable Chemistry and Pharmacy
Carbon dioxide utilization in catalysis
article

Zinc-based oxides as alternative cheap and stable catalysts for the production of adipates from cyclopentanone and dimethyl carbonate

Nikolaos Dimitratos, Jacopo De Maron, Gabriele Galletti, Tommaso Tabanelli, Amit Kumar Manna, Fabrizio Cavani, L. M. Monti, Davide Allkanjari, Elisa Valzano
article en

Abstract

Developing sustainable catalytic processes for specialty monomers is essential for advancing a renewable-based economy. Adipic acid esters, such as dimethyl adipate (DMA), are key intermediates in polyester and polyamide production and can be synthesized with complete atom economy (100 %) through the reaction of bio-based cyclopentanone (CPO) with dimethyl carbonate (DMC) or other CO 2 -derived carbonates. This study evaluates, for the first time, the catalytic performance of ZnO and Zn/Mg mixed oxides for this transformation. ZnO exhibited superior selectivity for DMA (53 %), compared to conventional MgO and CeO 2 catalysts by effectively suppressing heavy by-product formation, thereby inhibiting CPO self-aldol condensation. This suppression minimizes catalyst fouling, allowing ZnO to be easily and readily recovered and reused without significant loss of activity. In contrast, Zn/Mg/O mixed oxides enhanced reaction rates but led to lower selectivity, primarily producing branched methylated adipates, which could serve as alternative polymer precursors. Optimization of catalyst composition and reaction conditions was critical for maximizing diester yields in this one-pot transformation, selectivity producing DMA over ZnO (up to 48 % yield after 7 h of reaction) or DMA and methylated DMAs (with yields higher than 40 % after 3 h of reaction in the presence of Zn/Mg/O). However, dedicated studies on the β-keto-ester intermediate revealed that methanol availability over the catalytic surface at the temperature required for the “one-pot” process (i.e. 260 °C) is a limiting factor. This constraint can reduce DMA yield and productivity due to the unselective decomposition of the intermediate, highlighting an area for further process refinement. • Synthesis of α,ω-diesters from cyclic ketones and dimethyl carbonate. •Alternative, cheap and recyclable heterogenous catalysts based on Zn-based oxides. •Investigation of the reaction scheme and β-keto-ester intermediate conversion toward adipates.

Sustainable Chemistry and PharmacyVol. 45
Ospedale San Giuseppe (IT), University of Bologna (IT)
Openalex Percentile: Top 95%
Carbon dioxide utilization in catalysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.