Mercerized bacterial cellulose/chitosan/waterborne polyurethane composites for sustainable and effective food preservation packaging

• Develop innovative strategies to fabricate sustainable packaging materials. • In-situ fabrication of multilayer hybrid composites with superior performance. • The evaporation-induced alignment following mercerization enhances hydrophobicity and transparency. • The freshness preservation abilities are comparable to commercial plastic. • Full biodegradability without ecotoxicity in two months. Bacterial cellulose (BC), known for its exceptional physical properties and sustainability, has garnered widespread attention as a promising alternative to petrochemical-based plastic packaging. However, application of BC for packaging remains limited due to its hygroscopic nature, poor food preservation capabilities, and low optical transparency. In this study, a novel in-situ spraying method for chitosan (CS) encapsulation was developed to fabricate BC/CS hybrid structure layer by layer. The resulting composites exhibit effective antimicrobial activity against both Gram-positive and Gram-negative (> 75 %) bacteria, ensuring food preservation and safety. The BC/CS composites were modified through mercerization and heat drying (mBC/CS), transforming the cellulose crystal structure from cellulose I to the more stable cellulose II and inducing the alignment of a compact structure. Following waterborne polyurethane (WPU) coating, the mBC/CS/WPU composites acquired hydrophobic and heat-sealable properties, along with an 80 % reduction in haze and light transmittance exceeding 85 %. Further, they exhibited exceptional mechanical properties, including an ultimate tensile strength exceeding 200 MPa and omnidirectional flexibility. These composites could also preserve the freshness of sliced apples (< 20 % weight loss) and poached chicken (< 3 % weight loss) after one week of storage, comparable to commercial zipper bags, and also prevent food contamination. Notably, the mBC/CS/WPU composites displayed no ecotoxicity during decomposition and degraded completely within 60 days in soil. This study provides a valuable framework for functionalizing BC-based materials, promoting sustainable packaging, and contributing to the mitigation of plastic pollution.

Authors

Institutions

Publication Details

Journal
Chemical Engineering Journal
Published
2025-04-08
DOI
https://doi.org/10.1016/j.cej.2025.162332
Citations
16
Primary Topic
Microplastics and Plastic Pollution
Type
article
Field-Weighted Citation Impact
8.06

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Mercerized bacterial cellulose/chitosan/waterborne polyurethane composites for sustainable and effective food preservation packaging

Jhu‐Lin You, Ying‐Chih Liao, Annisa Istiqomah, Cheng-Ying Li et al.
16 citations
Chemical Engineering Journal
Microplastics and Plastic Pollution
8.06
article

Mercerized bacterial cellulose/chitosan/waterborne polyurethane composites for sustainable and effective food preservation packaging

Jhu‐Lin You, Ying‐Chih Liao, Annisa Istiqomah, Cheng-Ying Li, I‐Tseng Liu
article en
16 citations

Abstract

• Develop innovative strategies to fabricate sustainable packaging materials. • In-situ fabrication of multilayer hybrid composites with superior performance. • The evaporation-induced alignment following mercerization enhances hydrophobicity and transparency. • The freshness preservation abilities are comparable to commercial plastic. • Full biodegradability without ecotoxicity in two months. Bacterial cellulose (BC), known for its exceptional physical properties and sustainability, has garnered widespread attention as a promising alternative to petrochemical-based plastic packaging. However, application of BC for packaging remains limited due to its hygroscopic nature, poor food preservation capabilities, and low optical transparency. In this study, a novel in-situ spraying method for chitosan (CS) encapsulation was developed to fabricate BC/CS hybrid structure layer by layer. The resulting composites exhibit effective antimicrobial activity against both Gram-positive and Gram-negative (> 75 %) bacteria, ensuring food preservation and safety. The BC/CS composites were modified through mercerization and heat drying (mBC/CS), transforming the cellulose crystal structure from cellulose I to the more stable cellulose II and inducing the alignment of a compact structure. Following waterborne polyurethane (WPU) coating, the mBC/CS/WPU composites acquired hydrophobic and heat-sealable properties, along with an 80 % reduction in haze and light transmittance exceeding 85 %. Further, they exhibited exceptional mechanical properties, including an ultimate tensile strength exceeding 200 MPa and omnidirectional flexibility. These composites could also preserve the freshness of sliced apples (< 20 % weight loss) and poached chicken (< 3 % weight loss) after one week of storage, comparable to commercial zipper bags, and also prevent food contamination. Notably, the mBC/CS/WPU composites displayed no ecotoxicity during decomposition and degraded completely within 60 days in soil. This study provides a valuable framework for functionalizing BC-based materials, promoting sustainable packaging, and contributing to the mitigation of plastic pollution.

Chemical Engineering JournalVol. 512
National Taiwan University (TW), National Defense University (TW), Institute of Chemistry, Academia Sinica (TW)
National Taiwan University Hospital, National Science and Technology Council
Zero hunger
Openalex Percentile: Top 2%
Microplastics and Plastic Pollution
8.06
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.