Implementation of Pass Transistor Logic and C2MOS Linear Feedback Shift Register (LFSR) Circuit using FPGA and PSpice

In this paper, a 4-bit Linear Feedback Shift Register (LFSR) is implemented based on a well-designed architecture combining using Pass-Transistor (PT) and Clock Complementary Metal Oxide Semiconductor (C2MOS) logic techniques. The D-flip flop registers and the XOR gates are the main parts of the propose LFSR. Number of transistors along with the speed of LFSR were positively enhanced since the exploited logic design techniques tends to blend the flavor of NMOS and PMOS devices. The PSpice and Field Programmable Gate Array (FPGA) based on Hardware Description Language (HDL) are the two different LFSR implementation environments. It has been observed that LFSR performance was effectively improved in terms of size and speed. Therefore, paper’s main aim refers to decreasing in number of transistors as well as speeding up LFSR circuit. A minimum clock time of 5ns was recorded under clearly correct LFSR output patterns. The LFSR circuit Based CMOS techniques can reduce the exploited transistors up to 43% of the conventional C2MOS logic. Besides, the number of transistors being reduced reflects the achieved circuit’s size reduction. It was concluded that paying attention to the design of the main LFSR circuit parts contributes mainly in the enhancement of the whole circuit performance.