An Experimentation of Performance of Compression Ignition Engine Fueled with Nano-alumina–Enhanced Diesel, Diesel–Ethanol, and Diesel–Butanol Blends

<div class="section abstract"><div class="htmlview paragraph">This study is to use the renewable fuels such as bioethanol and biobutanol as performance improving additives into diesel fuel. Nano-alumina is added in three proportions into diesel, diesel–bioethanol, and diesel–biobutanol blends for further enhancement of performance. The novelty of this study is the utilization of the bio-alcohols manufactured from the waste vegetables and fruits, which are reducing the land pollution, disposal cost, and the decrease in the dependency of diesel fuel. Blends of diesel–bioethanol and diesel–biobutanol are prepared and tested for the homogeneity in the controlled temperature of 25°C. The blends after the homogeneity test are tested for the required properties and compared with the base of commercial Bharat Stage VI diesel. One blend from three base fuels such as diesel, diesel–bioethanol, and diesel–biobutanol is being chosen and further blended with three proportions of nano-alumina particles (50 mg/L, 75 mg/L, and 100 mg/L) and further tested for efficiencies in compression ignition engine. By the comparison of efficiencies, one blend with one proportion of nano-alumina is being compared for the parameters of the engine in five load conditions. The thermal energy release during the fueling is being analyzed by monitoring the heat release rate and the pressure of the engine during the testing. The results revealed that the addition of bioethanol and biobutanol improves the heat release rate by 5%–7% from the base diesel; the addition of 100 mg/L of nano-alumina increases the heat release by further 6.5%–9.5% in the blends of diesel, diesel–bioethanol, and diesel–biobutanol blends, respectively, operated in the range of 75%–85% of brake power of the maximum brake power of the test engine. The emissions of nitrogen oxides and smoke from the engine in these conditions are significantly low while comparing diesel. This study directs the utilization of the renewable fuels’ such as bioethanol and biobutanol up to 20%, which saves the same extent of diesel fuel—an import resource.</div></div>

Authors

Institutions

Publication Details

Journal
SAE technical papers on CD-ROM/SAE technical paper series
Published
2025-04-03
DOI
https://doi.org/10.4271/2025-01-5025
Primary Topic
Biodiesel Production and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

An Experimentation of Performance of Compression Ignition Engine Fueled with Nano-alumina–Enhanced Diesel, Diesel–Ethanol, and Diesel–Butanol Blends

Prabakaran Balasubramanian, Mohd Hafizil Mat Yasin
SAE technical papers on CD-ROM/SAE technical paper series
Biodiesel Production and Applications
article

An Experimentation of Performance of Compression Ignition Engine Fueled with Nano-alumina–Enhanced Diesel, Diesel–Ethanol, and Diesel–Butanol Blends

Prabakaran Balasubramanian, Mohd Hafizil Mat Yasin
article en

Abstract

<div class="section abstract"><div class="htmlview paragraph">This study is to use the renewable fuels such as bioethanol and biobutanol as performance improving additives into diesel fuel. Nano-alumina is added in three proportions into diesel, diesel–bioethanol, and diesel–biobutanol blends for further enhancement of performance. The novelty of this study is the utilization of the bio-alcohols manufactured from the waste vegetables and fruits, which are reducing the land pollution, disposal cost, and the decrease in the dependency of diesel fuel. Blends of diesel–bioethanol and diesel–biobutanol are prepared and tested for the homogeneity in the controlled temperature of 25°C. The blends after the homogeneity test are tested for the required properties and compared with the base of commercial Bharat Stage VI diesel. One blend from three base fuels such as diesel, diesel–bioethanol, and diesel–biobutanol is being chosen and further blended with three proportions of nano-alumina particles (50 mg/L, 75 mg/L, and 100 mg/L) and further tested for efficiencies in compression ignition engine. By the comparison of efficiencies, one blend with one proportion of nano-alumina is being compared for the parameters of the engine in five load conditions. The thermal energy release during the fueling is being analyzed by monitoring the heat release rate and the pressure of the engine during the testing. The results revealed that the addition of bioethanol and biobutanol improves the heat release rate by 5%–7% from the base diesel; the addition of 100 mg/L of nano-alumina increases the heat release by further 6.5%–9.5% in the blends of diesel, diesel–bioethanol, and diesel–biobutanol blends, respectively, operated in the range of 75%–85% of brake power of the maximum brake power of the test engine. The emissions of nitrogen oxides and smoke from the engine in these conditions are significantly low while comparing diesel. This study directs the utilization of the renewable fuels’ such as bioethanol and biobutanol up to 20%, which saves the same extent of diesel fuel—an import resource.</div></div>

SAE technical papers on CD-ROM/SAE technical paper seriesVol. 1
Hindustan Institute of Technology and Science (IN)
Openalex Percentile: Top 93%
Biodiesel Production and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.