High – gain and wide – bandwidth patch antenna for fifth generation communication applications at K – Band

The patch antenna usually used for many wireless applications, and fifth generation (5G) is the most attracting application in the field of millimeter wave communications recently. The researchers worked on solving problems those considered milestones against using patch antenna for 5G applications such as being an antenna with moderate gain and narrow operating bandwidth with high side lobe levels. In this article a microstrip patch antenna had been presented to operate over the n258 – Band for 5G communications at 26 GHz with an operating bandwidth around than 7 GHz. The proposed antenna was printed on Rogers RT/Duroid 5880 substrate. A high gain of 8.10 dB had been achieved with high Front – to – Back ratio of 24.47 dB and very low side lobe levels far field radiation pattern around -17 dB. The proposed antenna covered the operating bandwidth n258 for fifth generation applications in range of (24.25 – 27.50) GHz. The Computer simulation Technology (CST) had been used as a simulation environment for this design.

Institutions

Publication Details

Journal
International Journal of Electronics and Telecommunications
Published
2025-04-07
DOI
https://doi.org/10.24425/ijet.2025.153564
Primary Topic
Antenna Design and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

High – gain and wide – bandwidth patch antenna for fifth generation communication applications at K – Band

International Journal of Electronics and Telecommunications
Antenna Design and Analysis
article

High – gain and wide – bandwidth patch antenna for fifth generation communication applications at K – Band

article en

Abstract

The patch antenna usually used for many wireless applications, and fifth generation (5G) is the most attracting application in the field of millimeter wave communications recently. The researchers worked on solving problems those considered milestones against using patch antenna for 5G applications such as being an antenna with moderate gain and narrow operating bandwidth with high side lobe levels. In this article a microstrip patch antenna had been presented to operate over the n258 – Band for 5G communications at 26 GHz with an operating bandwidth around than 7 GHz. The proposed antenna was printed on Rogers RT/Duroid 5880 substrate. A high gain of 8.10 dB had been achieved with high Front – to – Back ratio of 24.47 dB and very low side lobe levels far field radiation pattern around -17 dB. The proposed antenna covered the operating bandwidth n258 for fifth generation applications in range of (24.25 – 27.50) GHz. The Computer simulation Technology (CST) had been used as a simulation environment for this design.

International Journal of Electronics and Telecommunications
Nahrain University (IQ)
Openalex Percentile: Top 91%
Antenna Design and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

High – gain and wide – bandwidth patch antenna for fifth generation communication applications at K – Band · International Journal of Electronics and Telecommunications (2025) | TGRS Research Map | TGRS