Crustal structure of the Curnamona Province in Australia by ambient noise tomography

The Curnamona Province in southern Australia is a 90,000 km 2 Paleoproterozoic to Mesoproterozoic craton that rifted from the Gawler Craton in the Neoproterozoic and is now separated by the Adelaide Rift Complex sediments in the Flinders Ranges. Three-component passive seismic data were collected over 30 days at 135 stations spaced approximately 25 km with sample rate of 2 ms and a natural frequency of 5 Hz. Cross-correlation functions of ambient noise were calculated between station pairs to determine dispersion curves at a period bandwidth of 3 to 9 s, from which a shear-wave velocity model was constructed to a depth of 20 km. In the top 5 km, low shear-wave velocity < 3400 m/s correlates with low electrical resistivity <100 Ohm.m from a broadband MT inversion of 134 co-located sites, primarily due to fluid-porosity of sediments. In the depth range 5–20 km there are two notable features. Firstly, across the southern part of the Curnamona Province shear-wave velocity increases by >200 m/s from west to east, over ∼200 km, correlated with a trend in Bouguer gravity that increases from −200 μm/s 2 to +200 μm/s 2 . Secondly, there is weaker correlation in dip and spatial extent between a zone of low resistivity <10 Ohm.m and low shear-wave velocity < 3600 m/s. Higher density crust in the eastern margin of the Curnamona Province may be due to Paleoproterozoic-aged mafic crust that was originally subducted and then upthrust to shallower depths during the Olarian Orogeny from 1620 to 1580 Ma. Reduced shear-wave velocity coincident with low-resistivity in the crust may be related to grain-boundary graphitic Paleoproterozoic sediments that would be ductile with slightly lower shear-modulus and be electrically conductive. • Ambient noise tomography shear-wave velocity model of the Curnamona Province Australia. • Shear-wave velocity models generated for 90,000 km 2 craton area to 20 km depth. • Model shows correlation with electrical resistivity model and gravity data.

Authors

Institutions

Publication Details

Journal
Tectonophysics
Published
2025-04-07
DOI
https://doi.org/10.1016/j.tecto.2025.230737
Citations
1
Primary Topic
Seismic Waves and Analysis
Type
article
Field-Weighted Citation Impact
1.87
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Crustal structure of the Curnamona Province in Australia by ambient noise tomography

Yingjie Yang, Goran Boren, Ben Kay, Xiaozhou Yang et al.
1 citations
Tectonophysics
Seismic Waves and Analysis
1.87
article

Crustal structure of the Curnamona Province in Australia by ambient noise tomography

Yingjie Yang, Goran Boren, Ben Kay, Xiaozhou Yang, Graham Heinson, Xin Tan
article en
1 citations

Abstract

The Curnamona Province in southern Australia is a 90,000 km 2 Paleoproterozoic to Mesoproterozoic craton that rifted from the Gawler Craton in the Neoproterozoic and is now separated by the Adelaide Rift Complex sediments in the Flinders Ranges. Three-component passive seismic data were collected over 30 days at 135 stations spaced approximately 25 km with sample rate of 2 ms and a natural frequency of 5 Hz. Cross-correlation functions of ambient noise were calculated between station pairs to determine dispersion curves at a period bandwidth of 3 to 9 s, from which a shear-wave velocity model was constructed to a depth of 20 km. In the top 5 km, low shear-wave velocity < 3400 m/s correlates with low electrical resistivity <100 Ohm.m from a broadband MT inversion of 134 co-located sites, primarily due to fluid-porosity of sediments. In the depth range 5–20 km there are two notable features. Firstly, across the southern part of the Curnamona Province shear-wave velocity increases by >200 m/s from west to east, over ∼200 km, correlated with a trend in Bouguer gravity that increases from −200 μm/s 2 to +200 μm/s 2 . Secondly, there is weaker correlation in dip and spatial extent between a zone of low resistivity <10 Ohm.m and low shear-wave velocity < 3600 m/s. Higher density crust in the eastern margin of the Curnamona Province may be due to Paleoproterozoic-aged mafic crust that was originally subducted and then upthrust to shallower depths during the Olarian Orogeny from 1620 to 1580 Ma. Reduced shear-wave velocity coincident with low-resistivity in the crust may be related to grain-boundary graphitic Paleoproterozoic sediments that would be ductile with slightly lower shear-modulus and be electrically conductive. • Ambient noise tomography shear-wave velocity model of the Curnamona Province Australia. • Shear-wave velocity models generated for 90,000 km 2 craton area to 20 km depth. • Model shows correlation with electrical resistivity model and gravity data.

TectonophysicsVol. 906
Southern University of Science and Technology (CN), China University of Geosciences (CN), The University of Adelaide (AU)
Climate action
Openalex Percentile: Top 20%
Seismic Waves and Analysis
1.87
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.