Wall movement during dewatering inside a diaphragm wall before soil excavation

• The potential for dewatering-induced movements of a diaphragm wall is identified. • Pre-excavation groundwater drawdown effects on adjacent in-situ walls were assessed via lab-scale wellpoint test. • Wall movements and changes in lateral stress associated with the dewatering are assessed. • The mechanisms of dewatering-induced wall movement prior to bulk excavation are identified. Significant movement of in-situ retaining walls is usually assumed to begin with bulk excavation. However, an increasing number of case studies show that lowering the pore water pressures inside a diaphragm wall-type basement enclosure prior to bulk excavation can cause wall movements in the order of some centimeters. This paper describes the results of a laboratory-scale experiment carried out to explore mechanisms of in situ retaining wall movement associated with dewatering inside the enclosure prior to bulk excavation. Dewatering reduces the pore water pressures inside the enclosure more than outside, resulting in the wall moving as an unpropped cantilever supported only by the soil. Lateral effective stresses in the shallow soil behind the wall are reduced, while lateral effective stresses in front of the wall increase. Although the associated lateral movement was small in the laboratory experiment, the movement could be proportionately larger in the field with a less stiff soil and a potentially greater dewatered depth. The implementation of a staged dewatering system, coupled with the potential for phased excavation and propping strategies, can effectively mitigate dewatering-induced wall and soil movements. This approach allows for enhanced stiffness of the wall support system, which can be dynamically adjusted based on real-time displacement monitoring data when necessary.