Effect of Heat Treatment on Microstructure and Residual Stress of a Nickel-Cobalt-Based Superalloy Produced by Laser Powder Bed Fusion

This study comprehensively evaluates a non-weldable nickel-cobalt-based superalloy fabricated using laser powder bed fusion (LPBF) technology. The investigation systematically examined the impact of heat treatment, specifically solution treatment and solution treatment followed by aging treatment, on the microstructural characteristics and the evolution of residual stress within the alloy. The findings indicated that the as-built Ni-Co-based superalloy predominantly consists of equiaxed crystals and epitaxial columnar crystals, with no formation of the γ′ phase observed. After the solution treatment, the alloy experienced equiaxed columnar crystallization, recrystallization, and grain refinement. Additionally, a significant quantity of γ′ phases within the alloy exhibited a specific arrangement and precipitation. Following the aging treatment, there was an observed increase in the average dimensions of both the γ′ phase and the grains within the alloy. The evolution of residual stress distribution perpendicular to the construction direction in the alloy, both before and following heat treatment, was assessed using the contour method. The results showed that heat treatment progressively diminished the residual stress levels within the alloy. Furthermore, this study discusses the interrelationship between residual stress and the microstructural evolutions of nickel-cobalt-based superalloys throughout the heat treatment process.