Marginal gap of printed, milled, and heat‐pressed two‐piece polyetheretherketone abutments before and after thermal cycling, and their pull‐off bond strength after thermal cycling
The tested abutments had marginal gaps below the clinically acceptable threshold of 120 µm, both before and after thermal cycling. HP-PEEK abutments may be more resistant to dislodgment from the Ti-base abutments than P-PEEK and M-PEEK abutments.
Authors
- Münir Demirel (ORCID: https://orcid.org/0000-0002-1487-6834)
- Burcu Kanpalta (ORCID: https://orcid.org/0000-0001-7742-3173)
- Almira Ada Diken Türksayar (ORCID: https://orcid.org/0000-0003-3558-3202)
- Mustafa Borga Dönmez (ORCID: https://orcid.org/0000-0002-3094-7487)
- Sebastian Spintzyk (ORCID: https://orcid.org/0000-0001-6830-4869)
- Naime Bilinç Bulucu
- Sandra Schulnig
Institutions
- University of Bern (CH)
- Istanbul Medipol University (TR)
- Biruni University (TR)
- FH Kärnten (AT)
Publication Details
- Journal
- Journal of Prosthodontics
- Published
- 2025-04-02
- DOI
- https://doi.org/10.1111/jopr.14052
- Citations
- 5
- Primary Topic
- Dental materials and restorations
- Type
- article
- Field-Weighted Citation Impact
- 8.38