Efficient Recovery of Gadolinium from Contaminated Waters Using Manganese Ferrite Nanoparticles

The widespread use of gadolinium (Gd) in medical and industrial applications, especially as a contrast agent in magnetic resonance imaging (MRI), has led to its increasing presence in surface waters, disrupting natural geochemical cycles and posing risks to aquatic ecosystems. Addressing this challenge, recent studies have explored the potential of magnetic materials, such as spinel ferrite nanoparticles, in the removal of Gd from contaminated water sources. The present study specifically focused on the use of MnFe2O4 nanoparticles to remove Gd from contaminated solutions, employing response surface methodology (RSM) to optimize sorption conditions. Key variables evaluated included salinity (0–30 g/L), initial Gd concentration (1–5 μmol/L), and sorbent dose (20–180 mg/L), at a fixed pH of 6. The results revealed that salinity had a minimal impact on Gd sorption, likely due to the high sorbent mass used. Optimal conditions were identified as a sorbent dose of 165 mg/L, an initial Gd concentration of 1.3 μmol/L, and a salinity level of 13.4 g/L, at pH 6. The process was efficient and rapid, achieving over 90% Gd removal within 1 h in both freshwater and saline conditions, and over 75% removal in mineral water within 3 h. The high efficiency and celerity of this method suggest that MnFe2O4 nanoparticles are a promising solution for treating Gd-contaminated hospital effluents. Future research should focus on validating these results in real-world effluent matrices and addressing the environmental and economic aspects of large-scale implementation, thereby contributing to sustainable water remediation strategies.