One-Part Geopolymer for Stabilising Crushed Rock Road Base Material

Geopolymers have attracted wide attention as effective soil stabilisers, presenting significant potential for several geotechnical engineering applications. These binders offer environmental benefits by utilising abandoned aluminosilicate industrial by-products, such as fly ash and slag, through mixing with an alkaline solution. In addition, they also decrease dependency on conventional Ordinary Portland Cement (OPC), which is identified with substantial artificial greenhouse gas emissions and high energy consumption during manufacture. However, the practical utilisation of geopolymers for the stabilisation of road materials is hindered by the intricate preparation process, which necessitates precise control over the proportions of the ingredients to achieve the required mechanical properties. This complexity becomes more pronounced when compared to the relatively simple method of using conventional cement, which requires fewer safety precautions while mixing with soil. This study investigates the development of a One-Part Geopolymer (OPG) powder, specifically formulated for the stabilisation of a Crushed Rock Base (CRB) material used for road construction. The optimal blend of OPG powder, comprising fly ash, slag and sodium metasilicate, is identified by assessing the monotonic and dynamic mechanical performances of the treated CRB compacted at the optimum moisture content using Unconfined Compressive Strength (UCS) and Repeated Load Triaxial (RLT) tests. The results of the study indicate that enhancing the strength performance of the OPG-treated CRB requires the calibration of the sodium oxide (Na2O) content in the alkaline activator with the total binder. It was also found that increasing the OPG content from 1% to 3% significantly enhances both the uniaxial strength and resilient modulus of the treated CRB, while simultaneously reducing the permanent deformation. Notably, the CRB specimens stabilised with 2% OPG exhibit mechanical properties comparable to those of bound Portland cemented materials.

Authors

Institutions

Publication Details

Journal
Geosciences
Published
2025-04-01
DOI
https://doi.org/10.3390/geosciences15040122
Citations
1
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.95
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

One-Part Geopolymer for Stabilising Crushed Rock Road Base Material

Mohamed A. Shahin, Hayder H. Abdullah, Guilherme Crepaldi Camarini
1 citations
Geosciences
Concrete and Cement Materials Research
0.95
article

One-Part Geopolymer for Stabilising Crushed Rock Road Base Material

Mohamed A. Shahin, Hayder H. Abdullah, Guilherme Crepaldi Camarini
article en
1 citations

Abstract

Geopolymers have attracted wide attention as effective soil stabilisers, presenting significant potential for several geotechnical engineering applications. These binders offer environmental benefits by utilising abandoned aluminosilicate industrial by-products, such as fly ash and slag, through mixing with an alkaline solution. In addition, they also decrease dependency on conventional Ordinary Portland Cement (OPC), which is identified with substantial artificial greenhouse gas emissions and high energy consumption during manufacture. However, the practical utilisation of geopolymers for the stabilisation of road materials is hindered by the intricate preparation process, which necessitates precise control over the proportions of the ingredients to achieve the required mechanical properties. This complexity becomes more pronounced when compared to the relatively simple method of using conventional cement, which requires fewer safety precautions while mixing with soil. This study investigates the development of a One-Part Geopolymer (OPG) powder, specifically formulated for the stabilisation of a Crushed Rock Base (CRB) material used for road construction. The optimal blend of OPG powder, comprising fly ash, slag and sodium metasilicate, is identified by assessing the monotonic and dynamic mechanical performances of the treated CRB compacted at the optimum moisture content using Unconfined Compressive Strength (UCS) and Repeated Load Triaxial (RLT) tests. The results of the study indicate that enhancing the strength performance of the OPG-treated CRB requires the calibration of the sodium oxide (Na2O) content in the alkaline activator with the total binder. It was also found that increasing the OPG content from 1% to 3% significantly enhances both the uniaxial strength and resilient modulus of the treated CRB, while simultaneously reducing the permanent deformation. Notably, the CRB specimens stabilised with 2% OPG exhibit mechanical properties comparable to those of bound Portland cemented materials.

GeosciencesVol. 15(4)
Curtin University (AU)
Openalex Percentile: Top 27%
Concrete and Cement Materials Research
0.95
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.