Impact of Oxygenated Fuel Components on Engine Performance and Particulate Emissions in Gasoline Blends

<div class="section abstract"><div class="htmlview paragraph">The challenges with electrification in the automotive industry have led to rethinking the decisions to ban internal combustion engines. Nonetheless, decarbonization of transportation remains a regulatory priority in many countries, irrespective of the energy source for automotive powertrains. Renewable oxygenated fuel components can help with the rapid decarbonization of gasoline fuels in the current fleet. Ethanol is one of the primary renewable components typically used for blending in gasoline primarily at 10% v/v but up to 20% v/v substitution which corresponds to 3.7 to 8.0% oxygen by mass. However, a range of oxygenates could be used instead of ethanol. This study aimed to determine if the engine could discriminate between different oxygenates in gasoline fuels blended at the same octane (RON) and oxygen levels.</div><div class="htmlview paragraph">Oxygenates such as methyl-tert-butyl-ether (MTBE) and ethyl-tert-butyl-ether (ETBE) were considered in this study. Blends were made using a combination of n-heptane, iso-octane, toluene, and oxygenated components. Seven blends with a nominal RON of 98 +/-2 were evaluated in a single-cylinder engine. Four E10 equivalent and three E20 equivalent fuel blends were studied. The engine was operated at a range of test conditions from throttled, low-load points to boosted, high-load points that required knock retard. The results indicated that all blends had minimal differences in engine performance in terms of knocking behavior, spark timing, burn duration, fuel flow, and injection duration which could all be compensated by the engine control unit (ECU). Particulate matter emissions (AVL micro soot sensor, PN10, PN23) were also evaluated at the test conditions. While the fuels had lower PM-generating components compared to commercial fuels, we could demonstrate that the PM emissions largely correlated with the particulate matter index (PMI) (or the toluene content) of the fuels.</div></div>

Authors

Institutions

Publication Details

Journal
SAE technical papers on CD-ROM/SAE technical paper series
Published
2025-03-31
DOI
https://doi.org/10.4271/2025-01-8446
Primary Topic
Advanced Combustion Engine Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Impact of Oxygenated Fuel Components on Engine Performance and Particulate Emissions in Gasoline Blends

Vickey Kalaskar, Daniel B. Pourreau, Robert Mitchell
SAE technical papers on CD-ROM/SAE technical paper series
Advanced Combustion Engine Technologies
article

Impact of Oxygenated Fuel Components on Engine Performance and Particulate Emissions in Gasoline Blends

Vickey Kalaskar, Daniel B. Pourreau, Robert Mitchell
article en

Abstract

<div class="section abstract"><div class="htmlview paragraph">The challenges with electrification in the automotive industry have led to rethinking the decisions to ban internal combustion engines. Nonetheless, decarbonization of transportation remains a regulatory priority in many countries, irrespective of the energy source for automotive powertrains. Renewable oxygenated fuel components can help with the rapid decarbonization of gasoline fuels in the current fleet. Ethanol is one of the primary renewable components typically used for blending in gasoline primarily at 10% v/v but up to 20% v/v substitution which corresponds to 3.7 to 8.0% oxygen by mass. However, a range of oxygenates could be used instead of ethanol. This study aimed to determine if the engine could discriminate between different oxygenates in gasoline fuels blended at the same octane (RON) and oxygen levels.</div><div class="htmlview paragraph">Oxygenates such as methyl-tert-butyl-ether (MTBE) and ethyl-tert-butyl-ether (ETBE) were considered in this study. Blends were made using a combination of n-heptane, iso-octane, toluene, and oxygenated components. Seven blends with a nominal RON of 98 +/-2 were evaluated in a single-cylinder engine. Four E10 equivalent and three E20 equivalent fuel blends were studied. The engine was operated at a range of test conditions from throttled, low-load points to boosted, high-load points that required knock retard. The results indicated that all blends had minimal differences in engine performance in terms of knocking behavior, spark timing, burn duration, fuel flow, and injection duration which could all be compensated by the engine control unit (ECU). Particulate matter emissions (AVL micro soot sensor, PN10, PN23) were also evaluated at the test conditions. While the fuels had lower PM-generating components compared to commercial fuels, we could demonstrate that the PM emissions largely correlated with the particulate matter index (PMI) (or the toluene content) of the fuels.</div></div>

SAE technical papers on CD-ROM/SAE technical paper seriesVol. 1
Southwest Research Institute (US)
Openalex Percentile: Top 95%
Advanced Combustion Engine Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.