Modification of Polyurethane/Graphene Oxide with Dielectric Barrier Plasma Treatment for Proper Coating Adhesion on Fiberglass

Wind turbine blades are made from fiberglass, whose faces are eroded due to environmental conditions. Polyurethane (PU) coatings are broadly used in several types of coatings due to their strong adhesion. However, their inferior mechanical properties limit their application on fiberglass. In this study, graphene oxide (GO) was modified through a dielectric barrier plasma (DBP) treatment at atmospheric pressure to improve the dispersion of GO in PU and increase its adhesion to fiberglass (GF) substrates, resulting in excellent adhesion properties of the PU/GO coating on fiberglass. Additionally, PU/GO coatings are crucial for preventing and protecting against erosion. The results obtained for the intensity ratio of the ID/IG peaks observed through Raman spectroscopy exhibited that the plasma treatment increased the defects in the GO structure through covalent and non-covalent interactions with the PU. Contact angle tests and surface free energy measurements indicated the deoxygenation of the GO structure, enhancing its dispersion in the PU matrix, as observed through XRD. The plasma treatment increased the PU/GO adhesion by 27.6% after 10 min of treatment, suggesting that more defects in the GO structure were correlated with greater adhesion strength.