Low-cost negative emissions by demand-side management for adsorption-based direct air carbon capture and storage

Abstract Limiting anthropogenic climate change to below 2 °C requires substantial and rapid reductions in greenhouse gas emissions. Additionally, carbon dioxide removal technologies are essential to compensate for hard-to-abate emissions and counteract overshooting the earth’s carbon budget. One prospective technology is direct air carbon capture and storage (DACCS), but its energy intensity and costs limit large-scale deployment. Flexible DACCS operation seems promising for cost reduction but yet remains underexplored. This study explores the economic benefits of flexible operation of adsorption-based DACCS, considering fluctuations in both electricity prices and greenhouse gas emissions from the electricity supply. To increase the feasibility of flexible DACCS operation, the typical steam-assisted temperature vacuum swing adsorption cycle is enhanced by introducing two break phases and variable air and steam mass flows during adsorption and desorption. The benefits of flexible operation are comprehensively evaluated using a DACCS system model integrating a detailed dynamic process model with life-cycle greenhouse gas emissions and economic data. The flexible operation allows each cycle to be adjusted to optimally address the time-varying greenhouse gas emissions and costs from electricity supply. A rolling horizon algorithm combined with particle swarm optimization is used to optimize the DACCS cycles in flexible operation mode over one week. The case study focuses on the future German power grid and a DACCS system using amine-functionalized sorbents. Results indicate that flexible DACCS operation can significantly reduce net carbon removal costs by up to 20 % compared to a steady-state operation. These findings highlight the potential of flexible DACCS operation to support carbon neutrality efforts by enabling cost-effective carbon dioxide removal through integration with volatile renewable energy systems.

Authors

Institutions

Publication Details

Journal
Carbon Neutrality
Published
2025-03-26
DOI
https://doi.org/10.1007/s43979-025-00123-0
Citations
12
Primary Topic
Carbon Dioxide Capture Technologies
Type
article
Field-Weighted Citation Impact
8.56

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Low-cost negative emissions by demand-side management for adsorption-based direct air carbon capture and storage

Mirko Engelpracht, Niklas von der Aßen, Patrik Postweiler, Daniel Rezo et al.
12 citations
Carbon Neutrality
Carbon Dioxide Capture Technologies
8.56
article

Low-cost negative emissions by demand-side management for adsorption-based direct air carbon capture and storage

Mirko Engelpracht, Niklas von der Aßen, Patrik Postweiler, Daniel Rezo, Benedikt Nilges
article en
12 citations

Abstract

Abstract Limiting anthropogenic climate change to below 2 °C requires substantial and rapid reductions in greenhouse gas emissions. Additionally, carbon dioxide removal technologies are essential to compensate for hard-to-abate emissions and counteract overshooting the earth’s carbon budget. One prospective technology is direct air carbon capture and storage (DACCS), but its energy intensity and costs limit large-scale deployment. Flexible DACCS operation seems promising for cost reduction but yet remains underexplored. This study explores the economic benefits of flexible operation of adsorption-based DACCS, considering fluctuations in both electricity prices and greenhouse gas emissions from the electricity supply. To increase the feasibility of flexible DACCS operation, the typical steam-assisted temperature vacuum swing adsorption cycle is enhanced by introducing two break phases and variable air and steam mass flows during adsorption and desorption. The benefits of flexible operation are comprehensively evaluated using a DACCS system model integrating a detailed dynamic process model with life-cycle greenhouse gas emissions and economic data. The flexible operation allows each cycle to be adjusted to optimally address the time-varying greenhouse gas emissions and costs from electricity supply. A rolling horizon algorithm combined with particle swarm optimization is used to optimize the DACCS cycles in flexible operation mode over one week. The case study focuses on the future German power grid and a DACCS system using amine-functionalized sorbents. Results indicate that flexible DACCS operation can significantly reduce net carbon removal costs by up to 20 % compared to a steady-state operation. These findings highlight the potential of flexible DACCS operation to support carbon neutrality efforts by enabling cost-effective carbon dioxide removal through integration with volatile renewable energy systems.

Carbon NeutralityVol. 4(1)
RWTH Aachen University (DE)
Bundesministerium für Bildung und Forschung
Openalex Percentile: Top 2%
Carbon Dioxide Capture Technologies
8.56
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.