Interfacial Failure in Flexible Pipe End Fittings: DIC and Cohesive Zone Modeling for Defect Analysis

Flexible pipe end fittings (EFs) transfer axial loads by embedding tensile armor within epoxy matrices. The integrity of bonding between the armor and resin profoundly influences the EF load-bearing capacity. This study investigated the debonding failure mechanism at the epoxy-resin–tensile-armor interface in flexible pipe end fittings through integrated experimental and numerical approaches. Combining tensile tests with digital image correlation (DIC) and cohesive zone modeling (CZM), the research quantified the impacts of interfacial defects and adhesive properties on structural integrity. Specimens with varying bond lengths (40–60 mm) and defect diameters (0–4 mm) revealed that defects significantly reduced load-bearing capacity, with larger defects exacerbating strain localization and accelerating failure. A dimensionless parameter, the defect-size-to-bond-length ratio (λ=D/2L), was proposed to unify defect impact analysis, demonstrating its nonlinear relationship with failure load reduction. High-toughness adhesives, such as Sikaforce® 7752, mitigated defect sensitivity by redistributing stress concentrations, outperforming brittle alternatives like Araldite® AV138. DIC captured real-time strain evolution and crack propagation, validating strain concentrations up to 3.2 at defect edges, while CZM simulations achieved high accuracy (errors: 3.0–7.2%) in predicting failure loads. Critical thresholds for λ (λ < 0.025 for negligible impact; λ > 0.05 requiring defect control or high-toughness adhesives) were established, providing actionable guidelines for manufacturing optimization and adhesive selection. By bridging experimental dynamics with predictive modeling, this work advances the design of robust deepwater energy infrastructure through defect management and material innovation, offering practical strategies to enhance structural reliability in critical applications.