Identification of water production mechanisms utilizing an array of analytical diagnostic techniques: A case study in a Yemeni oilfield

Excessive water production (EWP) poses a complicated challenge for the oil and gas sector. Even after treatment, this water may contain harmful components impacting the economy, environment, and human health. Therefore, it is crucial to identify the reasons for EWP to minimize or prevent it. This can be achieved by utilizing various techniques, including well testing, well logging techniques, reservoir modeling, and analytical approaches. This research focused on a suite of diagnostic plots—X-plots, Chan's plots, and traditional water cut vs. time linear plot techniques—which are recognized as the simplest, most cost-effective techniques for identifying water production mechanisms. The study's findings confirmed the presence of water production issues in all the wells under investigation. Traditional water cut vs. time linear plots indicate that water coning is the major mechanism of excessive production in all wells except for two wells, indicating near-wellbore water channeling and the presence of high conductive zones. Conversely, Chan's plots suggested that the main mechanism is multilayer channeling through fractures and/or high-permeability zones except for two wells, which exhibit near-wellbore water channeling. These results are further supported by X-plot analysis, which revealed that two of the four selected wells have a layering system, while the other wells exhibit a linear slope or no layering system. Over 110 million barrels of water have been produced, posing a significant environmental challenge due to the potential for substantial pollution. Treating this large volume of water is costly; thus, implementing a water flooding program to reinject the produced water into the reservoir is strongly recommended. • Characteristics, treatment methods, and environmental impacts of PW. • Utilizing a suite of analytical diagnostic techniques to identify WPMs. • Common causes of excessive water production in Yemeni oilfields. • Integration of effective diagnostic plots to validate the diagnosis findings.

Authors

Institutions

Publication Details

Journal
Water Cycle
Published
2025-01-01
DOI
https://doi.org/10.1016/j.watcyc.2025.03.007
Primary Topic
Reservoir Engineering and Simulation Methods
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Identification of water production mechanisms utilizing an array of analytical diagnostic techniques: A case study in a Yemeni oilfield

Ali Wahba, E. Márta, Mohamed A. Khamis, Mohamed Soliman
Water Cycle
Reservoir Engineering and Simulation Methods
article

Identification of water production mechanisms utilizing an array of analytical diagnostic techniques: A case study in a Yemeni oilfield

Ali Wahba, E. Márta, Mohamed A. Khamis, Mohamed Soliman
article en

Abstract

Excessive water production (EWP) poses a complicated challenge for the oil and gas sector. Even after treatment, this water may contain harmful components impacting the economy, environment, and human health. Therefore, it is crucial to identify the reasons for EWP to minimize or prevent it. This can be achieved by utilizing various techniques, including well testing, well logging techniques, reservoir modeling, and analytical approaches. This research focused on a suite of diagnostic plots—X-plots, Chan's plots, and traditional water cut vs. time linear plot techniques—which are recognized as the simplest, most cost-effective techniques for identifying water production mechanisms. The study's findings confirmed the presence of water production issues in all the wells under investigation. Traditional water cut vs. time linear plots indicate that water coning is the major mechanism of excessive production in all wells except for two wells, indicating near-wellbore water channeling and the presence of high conductive zones. Conversely, Chan's plots suggested that the main mechanism is multilayer channeling through fractures and/or high-permeability zones except for two wells, which exhibit near-wellbore water channeling. These results are further supported by X-plot analysis, which revealed that two of the four selected wells have a layering system, while the other wells exhibit a linear slope or no layering system. Over 110 million barrels of water have been produced, posing a significant environmental challenge due to the potential for substantial pollution. Treating this large volume of water is costly; thus, implementing a water flooding program to reinject the produced water into the reservoir is strongly recommended. • Characteristics, treatment methods, and environmental impacts of PW. • Utilizing a suite of analytical diagnostic techniques to identify WPMs. • Common causes of excessive water production in Yemeni oilfields. • Integration of effective diagnostic plots to validate the diagnosis findings.

Water CycleVol. 6
Suez University (EG), King Saud University (SA)
Clean water and sanitation
Openalex Percentile: Top 92%
Reservoir Engineering and Simulation Methods
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.