EFFECTS OF HOLE PERFORATION AND SURFACE CUTTING ON WOOD ELASTICITY USING ULTRASONIC AND VIBRATION METHODS

This study analyzed how hole perforation and surface cutting affect ultrasonic wave propagation velocity and resonant frequency in wood. While non-destructive evaluation techniques for wood elasticity are well-established, the specific influence of defects like holes and orthogonal cuts on wave behavior remains underexplored. This study aimed to fill this gap by assessing how these defects influence wave behavior and providing new insights into their impact on wood's mechanical properties. Four softwood species and seven hardwood species were analyzed. In hardwood specimens, ultrasonic propagation velocity and resonant frequency were measured under increasing levels of hole perforation (9, 27, and 45 holes). In contrast, the effects of one and two orthogonal surface cuts were examined in softwood specimens. The results revealed that the ultrasonic propagation velocity decreased noticeably with an increasing number of holes. Meanwhile, resonant frequency exhibited only a slight decrease. In contrast, softwoods displayed minimal changes in ultrasonic velocity but notable reductions in resonant frequency due to surface cutting. This study highlights the differences in continuous wave propagation pathways associated with the two defect types and estimation methods, offering novel insights into wood evaluation techniques.