A Method for Calculating Permeability Based on the Magnitude of Resistivity Divergence

Low-permeability sandstone reservoirs have low permeability, but due to their high porosity and difficulty in development, the development difficulty is relatively high. They can fully tap into the high potential of oil and gas resources in low-permeability sandstone reservoirs and occupy an important position in the global energy supply The study area belongs to low-permeability dense sandstone reservoir, and the destination layer has complex lithology, strong physical inhomogeneity, and complicated pore–permeability relationship, so the conventional core pore–permeability regression method and NMR SDR method do not satisfy the requirements of fine evaluation in terms of the accuracy of permeability calculation. According to the principle of resistivity measurement by electromagnetic waves with Logging While Drilling (LWD), this paper analyzes the reasons for the magnitude of resistivity divergence with Logging While Drilling at different exploration depths. There is a “low invasion phenomenon” during the drilling process of the drill bit. The higher the permeability of the formation, the more severe the “low invasion phenomenon”, and the greater the magnitude of resistivity divergence. In this paper, through the conventional log curve response characteristics and correlation analysis, the P40H/P16H parameter were selected to characterize the magnitude of resistivity divergence, and a fine evaluation model of the reservoir based on the P40H/P16H parameter was established in the study area by relying on the theory of the flow unit, and was applied to the prediction of permeability of new wells. The application results show that the calculated permeability is in good agreement with the results of core analysis, which provides a theoretical basis for the fine evaluation of low-permeability tight reservoirs.