k behaviour of a potential PWR assembly loaded disposal canister in simplified corrosion scenarios

• Critical importance of final disposal canister degradation (ELB) for nuclear criticality safety (NCS) of deep geological repositories. • First detailed neutron physical analysis of keff​ behavior caused by ELB degradation. • Observation of enhanced neutron backscattering by the canister wall and corrosion product magnetite. • Identification of the pivotal role of water distribution inside the ELB for reactivity changes. • Emphasis considering irregular magnetite and water distributions for more comprehensive NCS analyses. The Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra) and the Center for Nuclear Engineering and Sciences at the Paul Scherrer Institute (PSI) are investigating how potential long-term changes to the geometry and material composition of the current final disposal canister (BE-ELB) design may affect the neutron multiplication factor ( k eff ) of a canister loaded with PWR spent nuclear fuel assemblies (FAs). Several conservative corrosion scenarios were formulated, modeled, simulated and analyzed using the Monte-Carlo codes MCNP6.2® and Serpent2.2. The corrosion-induced effects, such as the replacement of moderator by magnetite, differ significantly from typical fuel lattice configurations used in reactor or storage pool safety analyses. This paper therefore focuses on underlying physical phenomena causing the observed k eff changes, including analyses of neutron currents and spectra, the ‘6-factor formula’, and the sensitivity of k eff to specific regions, materials, and nuclides. These analyses showed the canister wall and the corrosion product magnetite to act as a heavy reflector, enhancing the backscattering of neutrons in the epithermal and fast energy ranges. Furthermore, the critical role of the water distribution in all the potential scenarios was revealed. Water inside the FAs clearly increases reactivity by moderation, water outside the remainders of the steel basket, however, has an inhibiting effect on neutron multiplication. All simulation results heavily depend on the specific preliminary ELB design. To that end, the results of this study can help to optimize the ELB design and the Swiss concept for the final disposal of high-level radioactive waste.

Authors

Institutions

Publication Details

Journal
Nuclear Engineering and Design
Published
2025-03-27
DOI
https://doi.org/10.1016/j.nucengdes.2025.114007
Primary Topic
Nuclear reactor physics and engineering
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

k behaviour of a potential PWR assembly loaded disposal canister in simplified corrosion scenarios

M. Wittel, Alexander Vasiliev, Matthias Frankl, Hakim Ferroukhi et al.
Nuclear Engineering and Design
Nuclear reactor physics and engineering
article

k behaviour of a potential PWR assembly loaded disposal canister in simplified corrosion scenarios

M. Wittel, Alexander Vasiliev, Matthias Frankl, Hakim Ferroukhi, Nikitas Diomidis, D. Rochman, L. A. Berry
article en

Abstract

• Critical importance of final disposal canister degradation (ELB) for nuclear criticality safety (NCS) of deep geological repositories. • First detailed neutron physical analysis of keff​ behavior caused by ELB degradation. • Observation of enhanced neutron backscattering by the canister wall and corrosion product magnetite. • Identification of the pivotal role of water distribution inside the ELB for reactivity changes. • Emphasis considering irregular magnetite and water distributions for more comprehensive NCS analyses. The Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra) and the Center for Nuclear Engineering and Sciences at the Paul Scherrer Institute (PSI) are investigating how potential long-term changes to the geometry and material composition of the current final disposal canister (BE-ELB) design may affect the neutron multiplication factor ( k eff ) of a canister loaded with PWR spent nuclear fuel assemblies (FAs). Several conservative corrosion scenarios were formulated, modeled, simulated and analyzed using the Monte-Carlo codes MCNP6.2® and Serpent2.2. The corrosion-induced effects, such as the replacement of moderator by magnetite, differ significantly from typical fuel lattice configurations used in reactor or storage pool safety analyses. This paper therefore focuses on underlying physical phenomena causing the observed k eff changes, including analyses of neutron currents and spectra, the ‘6-factor formula’, and the sensitivity of k eff to specific regions, materials, and nuclides. These analyses showed the canister wall and the corrosion product magnetite to act as a heavy reflector, enhancing the backscattering of neutrons in the epithermal and fast energy ranges. Furthermore, the critical role of the water distribution in all the potential scenarios was revealed. Water inside the FAs clearly increases reactivity by moderation, water outside the remainders of the steel basket, however, has an inhibiting effect on neutron multiplication. All simulation results heavily depend on the specific preliminary ELB design. To that end, the results of this study can help to optimize the ELB design and the Swiss concept for the final disposal of high-level radioactive waste.

Nuclear Engineering and DesignVol. 437
Paul Scherrer Institute (CH), National Cooperative for the Disposal of Radioactive Waste (Switzerland) (CH)
Nationale Genossenschaft für die Lagerung radioaktiver Abfälle
Affordable and clean energy
Openalex Percentile: Top 92%
Nuclear reactor physics and engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.