Biodegradable Polymer Composites Based on Poly(butylene succinate) Copolyesters and Wood Flour

This study investigates the biodegradation behavior of poly(butylene succinate) (PBS) copolyesters containing dilinoleic acid (DLA) co-monomeric units and wood flour (WF) as a filler. PBS-DLA is a segmented thermoplastic elastomer (TPE), where the soft amorphous phase is formed by DLA ester segments, while the hard phase consists of crystallizable PBS domains. Wood-plastic composites (WPCs) were prepared with WF at weight fractions of 10%, 20%, 30%, and 40% wt. and analyzed in terms of surface morphology, chemical structure, mechanical performance, and thermal stability before and after biodegradation in soil conditions. The results of microscopic analysis confirmed that the PBS-DLA copolymer and its composites undergo surface biodegradation as manifested by increased surface roughness and microcrack formation, particularly in composites with a higher WF content. ATR FT-IR spectroscopy indicated oxidation and hydrolysis, supporting the hypothesis of progressive surface erosion. Mechanical tests showed a decline in tensile strength and elongation at break, with the most pronounced changes in composites containing 20% WF. Thermal analysis (DSC, DMTA, and TGA) confirmed that the PBS-DLA copolymer retains its thermoplastic elastomeric behavior after a 3-month biodegradation experiment. The storage modulus (E') remained stable, while only minor variations in melting and crystallization temperatures were observed. These findings reinforce the hypothesis of surface erosion rather than a bulk degradation mechanism. Given their biodegradability and retained thermoplastic behavior, WPC composites based on PBS-DLA copolyester could be promising for eco-friendly applications where controlled degradation is desirable, such as in packaging, agriculture, or biodegradable consumer goods.