536 Topology optimization for personalized intracranial aneurysm implant design

Objectives/Goals: To develop a personalized computational framework integrating computational fluid dynamics (CFD) and topology optimization for designing intracranial aneurysm implants. The primary objective is to reduce intra-aneurysmal blood flow velocity and enhance thrombus formation for improved treatment outcomes. Methods/Study Population: Patient-specific aneurysm geometries were extracted from pre-treatment rotational angiograms. A CFD-driven topology optimization framework was employed to design implants that reduce intra-aneurysmal flow velocity. The fluid dynamics were modeled using Navier–Stokes equations and the structural integrity of the implants was ensured by linear elasticity equations. The solid isotropic material with penalization (SIMP) method was applied to optimize the implant’s porous architecture, balancing flow reduction with structural support. COMSOL Multiphysics software was used to implement the optimization. Results/Anticipated Results: The optimized implants demonstrated significant reductions in intra-aneurysmal blood flow velocity and improved hemodynamic conditions. Flow velocity within the aneurysm was reduced by 77%, and the fluid energy dissipation ratio showed a 78.9% improvement compared to pretreatment conditions. The optimized porous structures were tailored to the aneurysm’s specific geometry, providing personalized designs that improve flow stasis and thrombus formation. Further validation of the implants will be performed in vitro and in vivo to assess their effectiveness and biocompatibility. Discussion/Significance of Impact: This personalized implant design framework could lead to better treatment outcomes by reducing aneurysm recurrence and complications compared to current devices. It provides a pathway for improved occlusion rates and patient-specific solutions for intracranial aneurysms.