High-cycle fatigue modelling of AA2519–AA1050–Ti6Al4V (T62) layered material based on its base components
The paper presents a fatigue test in a high-cycle range of composite material AA2519–AA1050–Ti6Al4V (T62). An explosively welded technology produced the material. The tests were made for round, smooth, and notched specimens. A stress concentration factor was equal to 1.75 and 2.28 for specimens with a radius of 2 mm and 1 mm, respectively. The load was applied by an axial force with a symmetry cycle with a stress ratio of −1. As expected, the fatigue life was correlated with the stress concentration factor, as it is for homogeneous material. The purpose of the paper was to develop a model for estimating the fatigue life of a layered material based on the fatigue strength of its base materials that differ in terms of the modulus of longitudinal elasticity, taking into account the stress concentration attributed to the notch effect, using selected geometry variants. A verification made for the proposed model gives satisfactory results. The discrepancy between the model and experimental linear regression was assessed using Shannon's maximum information Q ( X, X M ). The differences ranged from 0.04 to 0.193. It is worth noting that the authors have not found any model allowing an estimate of fatigue life based on the fatigue properties of the materials used for explosive welding.
Authors
- Przemysław Strzelecki (ORCID: https://orcid.org/0000-0001-7391-5963)
- Maciej Kotyk (ORCID: https://orcid.org/0000-0002-8681-8684)
Publication Details
- Journal
- International Journal of Damage Mechanics
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1177/10567895261506584
- Citations
- 1
- Primary Topic
- Fatigue and fracture mechanics
- Type
- article
- Field-Weighted Citation Impact
- 0.00