Effect of Nozzle Geometry on Erosion Characteristics in Abrasive Water Jet: Experimental and Numerical Analysis

In the field of abrasive-water-jet polishing technology, the influence of nozzle geometry on nozzle wear and internal-structure erosion in abrasive-water-jet polishing technology is studied, and the nozzle design is optimized through experiments and a numerical simulation to improve the stability and efficiency of the abrasive jet. The mathematical model between the cross-sectional area of the nozzle and the dimensionless length of the nozzle is established, as well as the variation in the static pressure of the nozzle and the length of the nozzle. Through Fluent simulation, it is found that when the nozzle length is 12 mm, the abrasive-phase acceleration is sufficient and the erosion intensity is minimal. After 480 h of erosion experiments, the erosion profile of nozzle cavity was detected. The results show that the erosion strength of the 12 mm nozzle is the least, followed by the 6 mm nozzle, and the 18 mm nozzle is the strongest, which is consistent with the simulation results.