Investigation of Fresh Properties of Self-Leveling Cement-Based Pastes with CFB Fly Ash as an SCM

The incorporation of circulating fluidized bed (CFB) fly ash into self-leveling cement-based (SLC) paste production presents significant environmental advantages. However, its addition deteriorates the fresh properties of the paste, posing challenges for practical implementation. This research examined the fresh properties of SLC paste blended with CFB fly ash, emphasizing fluidity, rheological characteristics, and bleeding rate. To enhance flowability, polycarboxylate superplasticizer (PCE) was incorporated, with particular emphasis on its interaction with CFB fly ash. The findings reveal that adding CFB fly ash to cement-based paste significantly decreased fluidity while increasing yield stress and plastic viscosity. Incorporating 20 wt.% CFB fly ash reduced paste fluidity by 51.4%, while plastic viscosity and yield stress increased by factors of 2.3 and 73, respectively. While PCE enhanced the fluidity of the blended paste, its water-reducing efficiency diminished, and the bleeding rate of the paste increased with higher CFB fly ash dosage. The water-reducing capability of PCE in the CFB fly ash-blended cement paste with 20 wt.% CFB fly ash decreased by 40.0%, and the bleeding rate of the paste increased from 0.6% to 6.7%. This effect was primarily attributed to the poor compatibility between PCE and CFB fly ash. The decline in PCE efficiency with higher CFB fly ash content, along with its lower adsorption capacity on CFB fly ash compared to cement particles, further confirmed this incompatibility.