Application of the random material point method to 3D slope failures

Three-dimensional and spatial variability effects on slope failure processes are investigated for an idealised slope stability problem with the random material point method (RMPM). A 45 degree slope is brought to failure by either its own weight or by a combination of its own weight and an additional surface load applied at the crest. The ultimate failure load and potential failure processes are studied for various (heterogeneous) material strength profiles. In 3D, failures tend to spread sideways and backwards. For the slope geometry considered, the resistance to initial and secondary failures in 3D simulations tends to be higher than in 2D simulations, probably due to the additional resistance from the ends of the failure surfaces. The failure behaviour changes when a depth trend in the material strength is introduced. A depth trend in the material strength triggers a flow-like failure process, instead of distinct (approximately) circular failure surfaces which are encountered in a material without a depth trend. The flow-like behaviour causes an expansion in the failure zone in all directions while avoiding (where possible) local strong zones.