Numerical study of turbulent bubbly upflow: effect of density ratio

In this study, we conducted interface-capturing high-resolution simulations of a bubbly upflow in a vertical channel to investigate the bubble distribution and its interaction with surrounding turbulence, focusing on the effects of the density ratio. A bulk Reynolds number $Re_b=2300$ was used for all simulations. The influence of density ratio on vortex structures and turbulence statistics differed between the near-wall and core regions of the channel. Adding 5.43 $\%$ gas caused an increase in wall friction. By applying a generalised FIK identity to analyse wall friction, it was determined that the drag rise in the bubbly channel was mostly due to the near-wall region. Visualisation of the bubble and vortex structures showed that small bubbles near the wall induced larger magnitude of Reynolds shear stress and increased wall friction. Bubble behaviour near the wall region was similar for density ratios above 30, leading to wall friction saturation. In the core region, large deformable bubbles created wake vortices due to slip velocity between liquid and gas phases. Wake vortices help large bubbles absorb smaller bubbles and maintain their sizes. As the density ratio increased, the slip velocity increased owing to greater difference in the gravitational acceleration between liquid and gas phases, resulting in corresponding increase in wake intensity and velocity fluctuations. However, quadrant analysis showed that Q1 and Q3 events increased together with Q2 and Q4 events in the core region, cancelling out any net effect of wake vortices on Reynolds shear stress or wall friction.