Instability damping and amplification of compressible boundary layers via acoustic wall impedance

We investigate the stability of a compressible boundary layer over an impedance wall for both constant impedances and a frequency-dependent porous wall model. For an exponential mean flow profile, the solution of the Pridmore-Brown equation, i.e. the linearised Euler equations for compressible shear flows, is expressed exactly in confluent Heun functions and, with the boundary condition of acoustic wall impedance, reduced to a single algebraic eigenvalue equation. This, in turn, is solved asymptotically and numerically and provides the complete inviscid eigenvalue spectrum without spurious modes. The key finding is that impedance walls not only have a desirable stabilising effect on inviscid disturbances, but also induce new instabilities. The type of the destabilised mode and therefore also the direction of propagation of the modes with maximum growth rate as well as the destabilised wavenumbers depend significantly on the porous wall properties, in particular on the porous wall layer thickness. For small porous layer thicknesses, the impedance-induced instability is observed as a second mode instability, where we find above a critical porosity growth rates exceeding those present in the rigid-wall case.