Eliminations of sulphur and fluoride from contaminated water by the applications of various types of biosorbents materials

• These paper highlights the developments of biosorbents in the field of sulphates and fluorides removal from water. • Biosorption is a novel method to remove pollutants or recover valuable resources from water. • Biosorption is eco-friendly and environmentally friendly method for removing pollutants from water. • Regenerating the biosorbents can make the process more cost-effective. Industrial and human waste releases sulphur and fluoride metals into the water sources, polluting them and endangering humans and the environment. There are various methods available for removals of the pollutants from the water. The membrane filtering and Chemical precipitation are more expensive, useless at low metal concentrations, and produce vast amounts of sludge and toxic by products that must be disposed of when treating big volumes of water. Alternative the wastewater treatment using the biosorption technology is environmentally friendly method. These methods are cheaper, more accessible, and reusable than traditional ones. Biomass can be treated physically and chemically treated before usage. The other parameters included the contact time, agitation speed, adsorbent dosage, pH, and temperature also affects the biosorption performances. After the removal of sulphur and fluorides from water, the bio-sorbent can be regenerated and reused to save money. Wastewater pollution removal using adsorption method is generally accepted. In the present scenario, the magnetic biosorbents and nanoparticles biosorbents are used for wastewater treatment have been developed. The magnetic biosorbents are attractive because to their various active sites, large specific surface area, easy separation, and lower cost. Chemical activations like acid, alkali, and salt improve biosorbents adsorption. In this observe, the various biosorbents have been developed for their better performance on defluoridation and desulphuridation. Due to different scientific barriers in the biosorption procedures those obstruct its commercialization; there has been a gradually rising consideration in this area of study. Of late more consideration is being paid in the formation of cost-effective adsorbents using various agricultural wastes, plant biomass, bacteria, algae and fungi. This review article highlights the applications of different biosorbents, sorption isotherm, and kinetics. In addition, the challenges associated to the engineering uses of nanobiosorbents and several suggestions to deal with these issues are accessible to support their practical using forecast.