Aerodynamic deformation and breakup of wall-attached droplets in axisymmetric stagnation airflow

The aerodynamic deformation and breakup of wall-attached droplets in axisymmetric stagnation flow are investigated experimentally. A vertical shock tube is used to generate the shock wave accompanying the post-wave airflow, and the axisymmetric stagnation flow is formed through the impingement of an air stream on a solid wall. For the wall-attached droplets with initially hemispherical profile, four typical droplet deformation and breakup modes can be identified with the continuous increase of the droplet local Weber number, which are the vibrating mode, the compressing mode, the sheet thinning mode and the shear-induced entrainment mode. Quantitative analyses of droplet evolution dynamics are also conducted for the compressing mode and the sheet thinning mode, and the significant differences of air flow separation at the droplet lateral surface between these two modes are revealed. The potential flow model and the energy conservation model are further developed to predict the entire droplet deformation processes. The vibrating frequency and amplitude of droplets under the vibrating mode are predicted by a spring-mass model, and the surface perturbation wavelengths of droplets under the shear-induced entrainment mode are estimated based on the dispersion relation of Kelvin–Helmholtz instability. This work is proposed to give potential guidance for regulating the aerodynamic fragmentation of wall-attached droplets in practical engineering applications.