Forced Air-nano-fluid Cooling of Friction Pairs of Disc-pad Brake Devices

The development of designs and the theoretical studies of tubular type disk-pad brakes of drawworks with the forced air-nanofluid cooling of their friction pairs allowed to establish the following: improved wear-friction properties of friction pairs were achieved due to operation in a temperature rangebelow the permissible for the materials of friction linings and, as a result, braking qualities for the liftingshaft of the drilling rig; nanopowder of fusible metals are applied to the liquid, diluted with water or acetone, which allowed to significantly increase the thermal conductivity coefficient of the nanoliquid andthus improve the efficiency of forced cooling of the friction belts of the brake discs; it is necessary to observe the condition that the volumes of nanofluid in the evaporation zones are much larger than in thezones of its condensation, which intensifies the heat exchange in different aggregate states of the nanofluiddue to increased cycles of its circulation; accelerators of nanofluid movement in any aggregate state between the evaporation and condensation zones in their heated state are diffusers, and retarders are confusors acting as a transport zone, as well as non-continuous slits in the lower ring of the main disk, whichcause changes in the gradients of speed, pressure and temperature in nanofluid layers; the surface-volumegradient of the temperature of the friction belts during braking in the main disk of the tubular structure isinsignificant, and the depth gradient is small in magnitude.