Direct sample introduction in high-performance liquid chromatography analysis of oily medicinal cannabis samples using surfactant-free microemulsion

The therapeutic use of medicinal Cannabis has raised challenges in quality control and cannabinoid quantification in oil extracts, primarily due to incompatibility with liquid chromatography systems. Surfactant-free microemulsion (SFME) systems offer a promising, efficient, and sustainable solution, enabling direct analysis by high-performance liquid chromatography. These microemulsions are dispersions of two immiscible liquids, typically oil and water, made compatible by an amphiphilic substance that interacts with both polar and nonpolar fractions. After SFME testing and critical analysis of the results, clear and homogeneous microemulsions were observed regardless of the oil-to-water ratio studied, provided that sufficient quantities of 1-octanol:1-propanol (3:10 v/v) were added. Based on the established robust working range, the 1:2 (oil:ultrapure water) ratio (% w/w) was chosen as the compromise condition, minimizing medicinal oil use while ensuring compatibility with the chromatographic system. Univariate optimization of chromatographic conditions enabled simultaneous analysis of five cannabinoids, including cannabidiol (CBD), cannabidiolic acid (CBDA), tetrahydrocannabutol (THCB), cannabinol (CBN), and tetrahydrocannabinol (Δ9-THC) using a ZORBAX Eclipse Plus C18 column at 35 °C. The method employed isocratic elution with a mobile phase of 82:18%v/v methanol:ultrapure water containing 0.15 ± 0.05% v/v formic acid, a 1.0 mL min -1 flow rate, and a 20 μL injection volume, using the fluorescence and UV absorption detectors. This proposal offers sensitivity (LOD in the ng mL -1 ), selectivity, and separation efficiency, associated with low cost, minimal waste generation, and low energy demand, aligning with Green Chemistry principles. • SFME enables sustainable cannabinoid determination in cannabis oils via HPLC • Stable oil-in-water microemulsions ensure compatibility in liquid chromatography • Robust quantification of five cannabinoids with sensitivity in ng mL -1 order • Friendly proposed method corroborates with the principles of green chemistry • Quality control of cannabis oils for reliable dosages and treatment efficiency

Authors

Institutions

Publication Details

Journal
Journal of Pharmaceutical and Biomedical Analysis Open
Published
2025-03-11
DOI
https://doi.org/10.1016/j.jpbao.2025.100075
Citations
1
Primary Topic
Cannabis and Cannabinoid Research
Type
article
Field-Weighted Citation Impact
1.39
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Direct sample introduction in high-performance liquid chromatography analysis of oily medicinal cannabis samples using surfactant-free microemulsion

Alessandra L. M. C. da Cunha, Ana Paula Lamounier, Bárbara da Conceição Coelho Cotta Cardoso
1 citations
Journal of Pharmaceutical and Biomedical Analysis Open
Cannabis and Cannabinoid Research
1.39
article

Direct sample introduction in high-performance liquid chromatography analysis of oily medicinal cannabis samples using surfactant-free microemulsion

Alessandra L. M. C. da Cunha, Ana Paula Lamounier, Bárbara da Conceição Coelho Cotta Cardoso
article en
1 citations

Abstract

The therapeutic use of medicinal Cannabis has raised challenges in quality control and cannabinoid quantification in oil extracts, primarily due to incompatibility with liquid chromatography systems. Surfactant-free microemulsion (SFME) systems offer a promising, efficient, and sustainable solution, enabling direct analysis by high-performance liquid chromatography. These microemulsions are dispersions of two immiscible liquids, typically oil and water, made compatible by an amphiphilic substance that interacts with both polar and nonpolar fractions. After SFME testing and critical analysis of the results, clear and homogeneous microemulsions were observed regardless of the oil-to-water ratio studied, provided that sufficient quantities of 1-octanol:1-propanol (3:10 v/v) were added. Based on the established robust working range, the 1:2 (oil:ultrapure water) ratio (% w/w) was chosen as the compromise condition, minimizing medicinal oil use while ensuring compatibility with the chromatographic system. Univariate optimization of chromatographic conditions enabled simultaneous analysis of five cannabinoids, including cannabidiol (CBD), cannabidiolic acid (CBDA), tetrahydrocannabutol (THCB), cannabinol (CBN), and tetrahydrocannabinol (Δ9-THC) using a ZORBAX Eclipse Plus C18 column at 35 °C. The method employed isocratic elution with a mobile phase of 82:18%v/v methanol:ultrapure water containing 0.15 ± 0.05% v/v formic acid, a 1.0 mL min -1 flow rate, and a 20 μL injection volume, using the fluorescence and UV absorption detectors. This proposal offers sensitivity (LOD in the ng mL -1 ), selectivity, and separation efficiency, associated with low cost, minimal waste generation, and low energy demand, aligning with Green Chemistry principles. • SFME enables sustainable cannabinoid determination in cannabis oils via HPLC • Stable oil-in-water microemulsions ensure compatibility in liquid chromatography • Robust quantification of five cannabinoids with sensitivity in ng mL -1 order • Friendly proposed method corroborates with the principles of green chemistry • Quality control of cannabis oils for reliable dosages and treatment efficiency

Journal of Pharmaceutical and Biomedical Analysis OpenVol. 5
Instituto Federal do Rio de Janeiro (BR)
Zero hunger
Openalex Percentile: Top 23%
Cannabis and Cannabinoid Research
1.39
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.