Performance evaluation of fault severity estimation analytical model under noisy conditions in seven-phase electrical machines

It has been shown that an analytical model including amplitude, phase shift, and the mean value of the phase currents in seven-phase electrical machines can be used as relevant information for fault detection, isolation, and estimation. However, this model fails to estimate the fault severity accurately under noisy conditions, especially for faults affecting the mean value. Therefore, the model is extended with the noise as the fourth parameter. Two approaches are considered before the estimation performance is evaluated: the noise level is estimated, or the currents are first denoised. The simulation results with different combinations of noise level and fault severity show that both approaches are efficient and enhance the fault severity estimation, even under high-noise conditions (SNR as low as 5dB). Besides, the analytical model, including the noise, agrees well with the numerical model.