Molten base carbonisation and activation of non-lignin-rich biomass into hierarchically porous carbon with surface-rich functionalities for supercapacitor electrodes
• Facile single-stage thermal conversion of non-lignin-rich biomass into porous carbon. • Wet radish derived-carbon with ultra-micropores and rich O and N functionalities. • The carbon shows a specific surface area of 1172 m 2 g −1 and partial graphitisation. • Excellent supercapacitor electrodes with 257F g −1 and long cycle durability of 20,000 cycles. • A sustainable path way to address CO 2 emissions from biomass decomposition. Non-lignin-rich biomass has abundant reserves but remains underutilised as a sustainable carbon source for producing functional carbon materials in energy storage applications. The primary challenge is to develop an efficient and sustainable process to convert these resources into high-performance carbon as electrode active material for supercapacitors. To address this issue, a facile, low-cost molten base carbonisation and activation (MBCA) process is investigated to convert wet Radish (a non-lignin–rich biomass) into hierarchical porous carbon via a single thermal stage. This approach integrates carbonisation, in-situ activation, and heteroatom retention, yielding carbon with a specific surface area of 1172 m 2 g −1 , ultramicropores (0–0.7 nm), partial graphitic structure and nitrogen/oxygen-rich functional groups. The optimised carbon, obtained at 700 ˚C, as a supercapacitor electrode active material exhibited electrochemical performance, with a specific capacitance of 257F g −1 at 5 mV s −1 and 96F g −1 at 2 A g −1 , alongside remarkable cycle stability (92.6 % capacitance retention over 20,000 cycles) and low self voltage decay over 50 h. These results highlight the MBCA process as a viable solution for converting non-lignin-rich biomass into high-performance carbon materials, offering a practical and sustainable alternative for energy storage applications while mitigating environmental pollution from biomass decomposition.
Authors
- Mingchan Ma
- Bamidele Akinwolemiwa
- Ishioma Laurene Egun (ORCID: https://orcid.org/0000-0001-7515-2330)
- Di Hu (ORCID: https://orcid.org/0000-0002-5531-1135)
- Zhengfei Chen (ORCID: https://orcid.org/0000-0002-8747-3606)
- Haiyong He
- George Z. Chen (ORCID: https://orcid.org/0000-0002-5589-5767)
Institutions
- University of Nottingham Ningbo China (CN)
- University of Nottingham (GB)
- Ningbo University of Technology (CN)
- Chinese Academy of Sciences (CN)
- Gannan Normal University (CN)
- Ningbo Institute of Industrial Technology (CN)
Publication Details
- Journal
- Chemical Engineering Journal
- Published
- 2025-03-09
- DOI
- https://doi.org/10.1016/j.cej.2025.161386
- Citations
- 33
- Primary Topic
- Supercapacitor Materials and Fabrication
- Type
- article
- Field-Weighted Citation Impact
- 14.10