Expansion-induced fracture propagation in deep geothermal reservoirs under alternate-temperature loading

Hydraulic fracturing is a crucial technique for the extraction of geothermal energy from hot dry rock reservoirs. However, the development of such reservoirs faces significant challenges due to the high in-situ stress and strong elastic-plastic behavior of these rocks, which often result in simplified fracture geometries and subsequent low heat extraction efficiency. To address this issue, a novel reservoir treatment method based on thermal expansion and contraction principles is proposed. By applying alternating heating-cooling treatments to the reservoir, cyclic thermal stress is generated within the rock to enhance the complexity of post-fracturing fracture networks. To investigate the resultant hydraulic fracture propagation under alternate-temperature loading, a custom-developed thick-walled cylinder expansion fracturing device was employed to study the fracture propagation mechanisms in hot dry rock samples under cyclic thermal loading. The fracture network complexity was characterized by the fractal dimension method. Experimental results demonstrated that alternate thermal load cycling significantly enhances the fracture network complexity compared to conventional single-phase heat treatment. The maximum improvement in fractal dimension (3.86% increase) was observed at 500 ◦C. Under alternating temperature loads, the upper surface fractures predominantly exhibited bilateral symmetric structures. At 600 ◦C, a substantial increase in branched fractures and rock debris near boreholes occurred, indicating that alternating temperature loads significantly enhance the complexity of engineered fracture networks in hot dry rock. These findings suggest that incorporating thermal cycling into hydraulic fracturing processes can significantly improve the fracture network complexity, thereby enhancing the efficiency of heat extraction from hot dry rock reservoirs. Document Type: Original article Cited as: Wang, D., Dong, Y., Wei, C., Zhang, Q., Sheng, M., Yu, B. Expansion-induced fracture propagation in deep geothermal reservoirs under alternate-temperature loading. Advances in Geo-Energy Research, 2025, 15(3): 261-272. https://doi.org/10.46690/ager.2025.03.08

Authors

Institutions

Publication Details

Journal
ADVANCES IN GEO-ENERGY RESEARCH
Published
2025-03-02
DOI
https://doi.org/10.46690/ager.2025.03.08
Citations
8
Primary Topic
Rock Mechanics and Modeling
Type
article
Field-Weighted Citation Impact
6.91
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Expansion-induced fracture propagation in deep geothermal reservoirs under alternate-temperature loading

Mao Sheng, Daobing Wang, Chunlei Wei, Qitao Zhang et al.
8 citations
ADVANCES IN GEO-ENERGY RESEARCH
Rock Mechanics and Modeling
6.91
article

Expansion-induced fracture propagation in deep geothermal reservoirs under alternate-temperature loading

Mao Sheng, Daobing Wang, Chunlei Wei, Qitao Zhang, Yongcun Dong, Bo Yu
article en
8 citations

Abstract

Hydraulic fracturing is a crucial technique for the extraction of geothermal energy from hot dry rock reservoirs. However, the development of such reservoirs faces significant challenges due to the high in-situ stress and strong elastic-plastic behavior of these rocks, which often result in simplified fracture geometries and subsequent low heat extraction efficiency. To address this issue, a novel reservoir treatment method based on thermal expansion and contraction principles is proposed. By applying alternating heating-cooling treatments to the reservoir, cyclic thermal stress is generated within the rock to enhance the complexity of post-fracturing fracture networks. To investigate the resultant hydraulic fracture propagation under alternate-temperature loading, a custom-developed thick-walled cylinder expansion fracturing device was employed to study the fracture propagation mechanisms in hot dry rock samples under cyclic thermal loading. The fracture network complexity was characterized by the fractal dimension method. Experimental results demonstrated that alternate thermal load cycling significantly enhances the fracture network complexity compared to conventional single-phase heat treatment. The maximum improvement in fractal dimension (3.86% increase) was observed at 500 ◦C. Under alternating temperature loads, the upper surface fractures predominantly exhibited bilateral symmetric structures. At 600 ◦C, a substantial increase in branched fractures and rock debris near boreholes occurred, indicating that alternating temperature loads significantly enhance the complexity of engineered fracture networks in hot dry rock. These findings suggest that incorporating thermal cycling into hydraulic fracturing processes can significantly improve the fracture network complexity, thereby enhancing the efficiency of heat extraction from hot dry rock reservoirs. Document Type: Original article Cited as: Wang, D., Dong, Y., Wei, C., Zhang, Q., Sheng, M., Yu, B. Expansion-induced fracture propagation in deep geothermal reservoirs under alternate-temperature loading. Advances in Geo-Energy Research, 2025, 15(3): 261-272. https://doi.org/10.46690/ager.2025.03.08

ADVANCES IN GEO-ENERGY RESEARCHVol. 15(3)
Beijing Institute of Petrochemical Technology (CN), Pennsylvania State University (US), Yangtze University (CN), China University of Petroleum, Beijing (CN)
Openalex Percentile: Top 3%
Rock Mechanics and Modeling
6.91
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.