Estimation of Forest Canopy Height Using ATLAS Data Based on Improved Optics and EEMD Algorithms

The Ice, Cloud, and Land Elevation 2 (ICESat-2) mission uses a micropulse photon-counting lidar system for mapping, which provides technical support for capturing forest parameters and carbon stocks over large areas. However, the current algorithm is greatly affected by the slope, and the extraction of the forest canopy height in the area with steep terrain is poor. In this paper, an improved algorithm was provided to reduce the influence of topography on canopy height estimation and obtain higher accuracy of forest canopy height. First, the improved clustering algorithm based on ordering points to identify the clustering structure (OPTICS) algorithm was developed and used to remove the noisy photons, and then the photon points were divided into canopy photons and ground photons based on mean filtering and smooth filtering, and the pseudo-signal photons were removed according to the distance between the two photons. Finally, the photon points were classified and interpolated again to obtain the canopy height. The results show that the improved algorithm was more effective in estimating ground elevation and canopy height, and the result was better in areas with less noise. The root mean square error (RMSE) values of the ground elevation estimates are within the range of 1.15 m for daytime data and 0.67 m for nighttime data. The estimated RMSE values for vegetation height ranged from 3.83 m to 2.29 m. The improved algorithm can provide a good basis for forest height estimation, and its DEM and CHM accuracy improved by 36.48% and 55.93%, respectively.