One-Part Alkali-Activated Wood Biomass Binders for Cemented Paste Backfill

This study developed a one-part alkali-activated slag/wood biomass fly ash (WBFA) binder (AAS) for preparing cemented paste backfill (CPB) as an alternative to traditional cement. Through multi-scale characterizations (XRD, FTIR, TGA, rheological testing, and MIP) and performance analyses, the regulation mechanisms of slag/WBFA ratios on hydration behavior, microstructure, and mechanical properties were systematically revealed. Results demonstrate that high slag proportions significantly enhance slurry rheology and mechanical strength, primarily through slag hydration generating dense gel networks of hydration products and promoting particle aggregation via reduced zeta potential. Although inert components in WBFA inhibit early hydration, the long-term reactivity of slag effectively counteracts these negative effects, achieving comparable 28-day compressive strength between slag/WBFA-based CPB (4.11 MPa) and cement-based CPB (4.16 MPa). Microstructural analyses indicate that the disordered gels in AAS systems exhibit silicon–oxygen bond polymerization degrees (950 cm−1) comparable to cement, while WBFA regulates Ca/Si ratios to induce bridging site formation (900 cm−1), significantly reducing porosity and enhancing structural compactness. This research provides theoretical support and process optimization strategies for developing low-cost, high-performance mine filling materials using industrial solid wastes, advancing sustainable green mining practices.